Did you modify JINETD so it logs with ";PRI=CS" and program is ran with
";PRI=CS" option ?

--
=========================================
Denis  (Remove "removeit." from email address)
=========================================
"Matthew Perdue" <[log in to unmask]> wrote in message
news:3sSdnajxHb8jg2SjXTWJhA@fidnet.com...
> Customer's site was setting up for ftp services for the first time.
> After running FTPCNFJ.ARPA, checking SERVICES.NET, INETDSEC.NET and
> INETDCNF.NET using another working system as an example making sure ftp
> 21/tcp and specific IP address blocks allowed in INETDSEC and starting
> JINETD.NET the system:
>
> 1 - will establish an ftp connection to itself after what seems to be
> something needing to timeout (takes about 1.5 minutes before getting
> the login prompt)
> 2 - shows in the $stdlist the connection attempts for network
> connections but they never get the login prompt
> 3 - logs to FTPLOG.ARPA getting NetIPC errors, connection reset by peer
>
> This system is a 989 running 7.0 pp1 and never had ftp services set up,
> also we're not planning on running telnet but a test got the same delay
> and no login prompt.
>
> Any ideas on what would be hanging the ftpsrvr process giving the slow
> response for login prompt?
> Could the network connection attempts be timing out causing the NetIPC
> errors and 'connection reset by peer' as I suspect? The connections
> attempted have been ftp in a dos window.
>
> I'm sure it's something simple that someone on this list will spot
> within a second or two (it's been a long day....). Thanks!
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *