I concur with donna.
Check typeahead.
It probably should be disabled.
At 12:29 PM 2011-03-18, John Rogers wrote:
>Ok, Alan, good point, however logged on to GSP as the same
>user/password as on a VT-MGR session yields 2 different results, if
>it were a security/group permission issue, it would exhibit the same
>result in both places.
>
>Jack, interesting idea, GSP being telnet, is ONLY port 23, correct?
>and assuming I connect to "LAN1" via vt-mgr (1570) and/or telnet
>(23) and it 'connects' but Designer doesn't work seems to imply the
>'firewall ports' are open otherwise I would not even get to the front door no?
>
>That said, do you think designer is someone opening a different port
>to do it's work? within Reflection, i seriously doubt it.
>
>
>Great responses, at least it's making me think, and thinking is
>good..... I think.
>
>
>Cheers,
>
>John
>
>
>
>
> From the symptoms, John, it sounds like ports are open on the GSP
> IP that aren't on the normal NIC/IP connection.
>Just a suggestion to check the actual switch/network settings for
>both pathways to the 3K.
>jack
>
>
>-----Original Message-----
>From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
>Behalf Of John Rogers
>Sent: Friday, March 18, 2011 12:11 PM
>To: [log in to unmask]
>Subject: Re: [HP3000-L] Mpe: Speedwre and MPE
>
>Craig,
>
>Thanks for the quick response, let me clarify, we telnet to the HP's
>LAN1, and the designer issue STILL occurs, if we telnet to GSP
>designer works without issue. so the thought is still something
>inside the NS3000 stack, as GSP lives outside of that.
>
>Comments welcomed.
>
>
>
>Raise a pint,
>
>John.
>
>************Original Message below *******************
>
>
>John,
>
>You say it works when you TELNET to the GSP.
>
>What happens when you TELNET to the HP3000? Is it just the VT-MGR
>connection that causes a problem?
>
>-Craig
>
>
>--- On Fri, 3/18/11, John Rogers <[log in to unmask]> wrote:
>
>From: John Rogers <[log in to unmask]>
>Subject: Mpe: Speedwre and MPE
>To: [log in to unmask]
>Date: Friday, March 18, 2011, 8:58 AM
>HP3000L Subscribers,
>
>We have an odd issue with one of our HP3000's
>We performed an install on a DR system utilizing the CSLT from our
>current HP, so fairly standard.
>We have restored accounting structure, BULDACCT, UDCS etc.
>Restored all 'data' needed
>We can connect via network both Telnet and VT so functionally the
>system is fine.
>Both systems are running MPE 7.5 at the same patch level, (NOT PP5)
>but the patches should NOT come into play for this exercise.
>
>So here is the question: we run a program from Speedware called
>Designer, basically we create a 'new design' which in turn creates a
>DB based on that design, and continues. So on this new system via
>Reflection VT-MGR it 'hangs' when saving the new design
>
>On the current production system there are NO problems running Designer.
>
>Here's the very bizarre issue, if we GSP to console, and attempt to
>run Designer and create a new design it works WITHOUT issue, so we
>are thinking it is somehow network 'within the HP' related.
>
>Any suggestions are greatly appreciated.
>
>Cheers,
>
>John
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>Call us today about our Windows consulting for monthly support
>services, plus configurations and migrations.
>
>CONFIDENTIALITY NOTICE: This communication with its contents may
>contain confidential information. It is solely for the use of the
>intended recipient(s). Unauthorized interception, review, use or
>disclosure is prohibited and may violate applicable laws including
>the Electronic Communications Privacy Act. If you are not the
>intended recipient, please contact the sender and destroy all copies
>of the communication.
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Tel: 416.702.7900
email: [log in to unmask] web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|