connect modem with terminal: USE HYPERTERMINAL OR REFLECTIONS

type this

AT&F
ATE1
ATM1
ATQ0
ATV1
ATX1
AT&B0
AT&C1
AT&D2
AT&H0
AT&I0
AT&K0
AT&M0
AT&R1
AT&S0=1
ATW???? CHECK MANUAL TO SAVE CONFIG TO MODEM

NMMGR/3000 (B.06.00) #23 Terminal Profile                               Data:
Y
Fill in the required information; then press the Save Data key.

Command:

PATH:  DTS.PROFILE.MD16U192


Terminal type         [10]  (10, 18, or 24)
   or terminal type file name [                          ]

Line speed         [19200]  (300, 1200, 2400, 4800, 9600, 19200, or 38400
bps)
Record width        [80  ]  (1... 2048 bytes)
Modem type             [1]  (0 - none, 1 - US, 2 - European)
Modem behavior         [1]  (0 - none, 1 - DCE, 2 - DTE, 3 - DCE high)
Parity              [NONE]  (None, Even, Odd, 0's, or 1's)
Speed/Parity Sensing?  [Y]  (Y/N)     Allow :HELLO logon?  [Y] (Y,N)
Reset HP terminal?     [N]  (Y/N)     NLIO device?         [N] (Y,N)
Hardware handshaking   [N]  (Y/N)

If configuring device classes, enter names below.  If additional names are
required, press Go To CLASSES, otherwise press Prior Screen.

   Device class   [MODEM   ]  [        ]  [        ]  [        ]
      names       [        ]  [        ]  [        ]  [        ]

File:  NMCONFIG.PUB.SYS


Worked for me !!!!!!!!!!


David Hutchinson
GGT
24 Industrial Park Road West
Tolland, CT 06084
860-871-3841