HP3000-L Archives

May 2007, Week 4

HP3000-L@RAVEN.UTC.EDU
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Duplex
From:
J Dolliver <[log in to unmask]>
Reply To:
[log in to unmask]
Date:
Tue, 22 May 2007 11:12:16 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (56 lines) 
You also have to make sure that if you are hooked up to a router that you have the network connection set all the way through from end to end nailed at 100MB. 

Full Duplex, No negotiate is the correct settings

HTH
Joe

-------------- Original message from Tom Hula <[log in to unmask]>: -------------- 


> Thanks to all who responded........ 
> 
> I set the NMMGR settings to turn off auto-negotiate and turn on full duplex. 
> 
> When I do a Linkcontrol @,A it shows that it perceives Full Duplex: 
> 
> PUB.SYS:LINKCONTROL @,A 
> Linkname: DTSLINK Linktype: PCI 100BT Linkstate: CONNECTED 
> Physical Path: 0/0/0/0 
> Current Station Address: 00-30-6E-26-61-F2 
> Default Station Address: 00-30-6E-26-61-F2 
> Current Multicast Addresses: 
> 09-00-09-00-00-01 09-00-09-00-00-03 09-00-09-00-00-04 
> 09-00-09-00-00-06 
> 
> Transmit bytes 3500008 Receive bytes 2522956 
> Transmits 11119 Receives unicast 7538 
> Transmits no error 11119 Receives broadcast 13843 
> Transmits dropped 0 Receives multicast 0 
> Transmits deferred 0 Receives no error 17547 
> Transmits 1 retry 0 Recv CRC error 2 
> Transmits >1 retry 0 Recv Maxsize error 0 
> Trans 16 collisions 0 Recv dropped: addr 3821 
> Trans late collision 0 Recv dropped: buffer 13 
> Trans underruns 0 Recv dropped: descr 0 
> Carrier losses 0 Recv dropped: other 2 
> Trans jabber timeout 0 Recv watchdg timeout 0 
> Link disconnects 3 Recv collisions 0 
> Link speed 100 Recv overruns 0 
> Link duplex Full Link auto sensed No 
> Link mode 100Base-TX Core Secs since clear 227369 
> 
> 
> So, that appears to be working correctly. The switch still thinks the 
> connection is Half, even with recycling the power and changing 
> ports on the switch. I'm not sure what the problem is...or if there 
> is a problem, but again, thank you all. 
> Tom 
> Victor S. Barnes Company 
> 
> * To join/leave the list, search archives, change list settings, * 
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * 

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2