Mark,
There has to be an answer for this.
Did you post the LINKCONTROL @,a?   Or NETTOOL.NET --> RESOURCE --> DISPLAY
I am not sure if I am reading the gateway correctly.   Can you put in the subnet mask?

-Craig

      From: Mark Ranft <[log in to unmask]>
 To: [log in to unmask] 
 Sent: Tuesday, September 29, 2015 8:30 PM
 Subject: Firewall Setup for HP3000
   
We are trying to set up HP3000 to HP3000 communication via NS and FTP.  The
traffic is going through a firewall.  We have it working, but the speed is
too slow.  We  are getting 2 to 3 Mbps throughput on HP transfers.  PC to PC
transfers through the firewall are 22 Mbps.  I checked that the LAN switch
port on the 3000 is set to 100 - Full duplex.  

I am being asked what are the packet sizes or MTU on the HP3000.  Can anyone
help me answer or show me where to find and set the packet size?

Here is the information from NMMGR...

NM Configuration Manager  32098-20016 B.07.06 (C) Hewlett Packard Co. 1992
Reading commands from "NETINFOI.TEMP.SYS".
NMMGR>openconf NMCONFIG.PUB.SYS
NMMGR>summaryconf netxport
 
                  CRITICAL SUMMARY - NETXPORT CONFIGURATION
 
 
 TUE, SEP 29, 2015, 10:26 PM
 CONFIGURATION FILE NAME: NMCONFIG.PUB.SYS                  
 Validated subsystem.
 
 
 NODE NAME:
    BACKUP2.xxx.yyy
 TRANSPORT GLOBAL CONFIGURATION:
  Home Network Name:                      
  Maximum Inbound Buffer Memory:  2048
  Name Search Method:  1. (None selected)
 
 PACKET EXCHANGE PROTOCOL (PXP) CONFIGURATION:
  Checksum Enabled:                    Y
  Retransmission Interval (Secs):      10 
  Maximum Retransmissions Per Request: 4  
 
 TRANSMISSION CONTROL PROTOCOL (TCP) CONFIGURATION:
  Checksum Enabled:                                Y
  Maximum Number of Connections:                  20000
  Retransmission Interval Lower Bound (Secs):      1  
  Maximum Time to Wait For Remote Response (Secs): 180
  Initial Retransmission Interval:                2  
  Maximum Number of Retransmissions:              8  
  Connection Assurance Interval:                  60 
  Maximum Connection Assurance Retransmissions:    4  
 
 CONFIGURED NETWORK INTERFACES:
 
  Network Interface Type:              LAN
  Network Interface Name:              LAN1
  Network Interface IP Address:        C 192.168.001 001
  IP Subnet Mask:                        255.255.255.000
  Network Segment Size:                1514 
  HP UPC Number:                      08-00-09
  Number of Outbound Buffers          4096 
  Enable Ethernet:                        Y
  Enable IEEE802.3:                        Y
  Number of Store and Forward Buffers: 0  
  Load Network Directory Mappings:    No
 
 PROBE PROTOCOL CONFIGURATION:
  Proxy Enabled:  No
 
  Probe Requests  Proxy Requests
 
        2                2      Retransmission Maximum
        1                4      Retransmission Timeout (Seconds)
 
 ADDRESS RESOLUTION PROTOCOL (ARP):
  Retransmission Maximum:        2 
  Retransmission Timeout Value:  1 
 
 NETWORK INTERFACE LINKS:
  LINK NAME:  LAN1        TYPE:  BT100
  Enable Idle Device Timer:                N
 
    Physical Path:              0/0/0/0                        
    Factory Configured address:  Y
    Local station address:      FF-FF-FF-FF-FF-FF
    Use Auto negotiation:        N
    Link Speed:                  100
    Full Duplex mode:            Y
 
  INTERNET CONFIGURATION:
 
    Neighbor Gateway Name: GW          Gateway IP Address: C 192.168.001
200
    Reachable Networks:
      IP Network Number    IP Subnet Mask    Hops
      -----------------    --------------    ----
      A 000 000.000.001                            
 
 
  -------------------------------------------------------------------------
 
 Output completed successfully.
 
NMMGR>exit

Mark Ranft
(612) 804-2774
[log in to unmask]

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *



* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *