Also, Larry, if you haven't done an ER to enable remote, that will have to be done on site (can't be done from taking the console to a normal session).

Jack
-----Original Message-----
From: Craig Lalley [mailto:[log in to unmask]]
Sent: Sunday, May 03, 2009 6:21 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] GPS access

Larry,

Look on the back of the CPU and you will see a small hole labeled GSP RESET.  You need your favorite techie paperclip.

Just insert paperclip, you will feel it depress.  It takes about a minute to reset.  Don't worry, it only reboots the GSP, and will not affect the HP3000.

I find it is necessary to reset the GSP about once a year.  It seems to correlate to when you really need to get access, and you can't get physical access to the box.  Good ole Murphy.

-Craig



--- On Sun, 5/3/09, Larry Simonsen <[log in to unmask]> wrote:

> From: Larry Simonsen <[log in to unmask]>
> Subject: GPS access
> To: [log in to unmask]
> Date: Sunday, May 3, 2009, 3:42 PM
> we have a SERIES e3000/A400-100-11 that is housed at a third party
> site out of the city i am located in.  i need to configure some
> additional disc drives and i believe reboot the server.  the GPS is
> connected to a IP switch and i have the IP address for it but it is
> not responding.  i believe i need to enable it fro the console.  can
> this be done from the soft console(my PC as the console with a console
> # command)?  please provide instructions on how this can be done.
>
> thanks in advance.
>
>
> -------------------------------------------------
> Larry Simonsen
> System Analyst
> Flowserve Corporation   1350 North Mountain Springs Parkway
> Springville,
> UT 84883   Phone: 801-489-2450   Fax: 801-491-1750
> -------------------------------------------------
> All opinions expressed herein are my own and reflect, in no way, those
> of my employer.
> -------------------------------
> NOTICE:  The information contained in this e-mail and any
> attachment(s)
> thereto is confidential and may contain attorney-client privileged
> communications or proprietary information. If you are not the intended
> recipient, you are hereby notified that any dissemination,
> distribution, or copying of this communication is strictly prohibited.
> If you have received this communication in error, please notify the
> sender immediately and delete the e-mail from your computer system
> without retaining any copies. Thank you.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit
> http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *