Eva,

  Make sure that your 928 is pointed to a valid Domain Name Server
which also has an entry for the localhost address (127.0.0.1) configured,
as well as the 928 itself.  If that doesn't correct the problem, let
me know offline and I can take a closer look at your setup for you.
There are also several documents available at www.sambaix.com that
might be of assistance to you.

Regards,
Michael L Gueterman
Easy Does It Technologies
SIG Web Co-Chair
http://www.editcorp.com
--

> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
> Behalf Of Pattison, Eva M.
> Sent: Wednesday, December 15, 1999 3:20 PM
> To: [log in to unmask]
> Subject: [HP3000-L] SAMBA HELP
>
>
> I would really appreciate help with installing SAMBA on my
> HP3000 928.  At
> this point I am just basically running around in circles so
> if anyone can
> guide me in some sort of direction, I'd really appreciate the help.
>
> History, this far.  I got the unsupported copy of  SAMBA from
> the Jazz web
> site link and got it installed on my system.  It's been a
> while now so I'm
> not sure what I did or didn't do.  My configuration file was
> copied from the
> sample and modified as little as possible.  Basically, I put
> the interfaces,
> the workgroup, debug level = 6, guest account = mgr.samba,
> added a share
> with: guest ok = yes, guest only = yes, write ok = yes, path=
> /SAMBA/SHR/temp.  I originally had what I believed to be a
> valid WINS server
> address.  I later changed it to wins support = yes.  I am
> streaming the JNMB
> and JSMB jobs.  I originally tried running it from inetd.  Both ways
> produced the same results.
>
> I can see the SambaComputer in my network neighborhood, but I
> cannot see the
> share I tried to add.  When I try to get to it from network
> neighborhood or
> by mapping a drive, the process takes a long time and then I get the
> message.  "Not accessible.  The network path was not found."
> When I run
> smbclient -L computername, I see Connected, write_sockets,
> Sent session
> request, Then "Session request failed (0,0) with myname=computername
> destname=computername, Unspecified error 0x0, Your server
> software is being
> unfriendly.
>
> In log.nmb, there is a lot of stuff that I don't understand.
> In it I also
> see a lot of find_name on WINS and find_name on local.  I
> also see wins
> proxy not enabled-failing lookup.
>
> I don't know where else to go.  Can anyone help?
>
> Thanks.
>
> Eva
>