Al,

        Does this printer support PostScript? If so, it
it the default emulation? I have seen this happen with
HP printers that had PostScript as the default. Switching
to auto select cured the problem.

Bob Schlosser - MPE-CSM
Ochsner Health Plan
(504) 219-8134

-----Original Message-----
From: Karman, Al [mailto:[log in to unmask]]
Sent: Thursday, June 21, 2001 11:00 AM
To: [log in to unmask]
Subject: Output to a networked printer


Greetings, -L....today, networked printing.  A remote site has gotten
themselves an external JetDirect, along with an IBM LaserPrinter 10.

The particulars....HP3000 937/LX, v. 6.00.00.  The non-HP (M$Word)
printing
works fine.

This is the NPCONFIG entry

18     (network_address = 132.0.85.254
        pjl_supported = false
        TCP_port_number = 9100
        setup_file = BLANK.HPENV.SYS)

ANY HP-initiated output router to this printer complains thusly...

gsmgr:10:51/151/Output spooler, LDEV #18:  Device does not support page
level
recovery.  Any interrupted document will be entirely reprinted.
Native Mode Spooler message 9038

The printer panel light flashes, indicating it's preparing to print,
stops
flashing, spoofle disappears....you get the picture.

As Always, Thanks In Advance!!!

Al Karman
IT Consultant
US Freightways
[log in to unmask]

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *