Patrick, as I understand it, this problem is patched in a new version of
the KLAEXPB4 file, which Unison should send you.
Phil Anthony
Director, System Resources
United Video Satellite Group
918-488-4059
e-mail: [log in to unmask]
> -----Original Message-----
> From: Patrick Santucci [SMTP:[log in to unmask]]
> Sent: Monday, May 18, 1998 1:04 PM
> To: [log in to unmask]
> Subject: Queue LIMIT problem in KLA Express
>
> The following was sent to Unison Technical Support on 5/15/98. (I
> haven't heard back yet; but now the problem is more serious because we
> upgraded our largest production system (a 995/500) on Saturday and it
> has the same problem):
>
> We are running KLA Express A.02.02 on an HP3000 928. When we upgraded
> from MPE/iX 5.0 (C.50.00) to 5.5 Release 4 (C.55.00) we encountered a
> problem with Express and have had to disable it.
>
> The problem is that EXPRESS is changing the LIMIT of the circular
> queues
> when we haven't told it to. We normally have them tuned as follows (as
> they appear on the main Express screen):
>
> CS=152,220,1,2000
> DS=202,238,2000,2000
> ES=240,253,2000,2000
>
> and a :SHOWQ;STATUS command in MPE displays:
>
> ------QUANTUM-------
> QUEUE BASE LIMIT MIN MAX ACTUAL BOOST TIMESLICE
> ----- ---- ----- --- --- ------ ----- ---------
> CQ 152 220 1 2000 29 DECAY 200
> DQ 202 238 2000 2000 2000 DECAY 200
> EQ 240 253 2000 2000 2000 DECAY 200
>
> But as soon as we start Express (i.e. KLAEXPB starts running) the
> tuning
> changes to:
>
> CS=152,250,1,2000
> DS=202,250,2000,2000
> ES=240,250,2000,2000
>
> and a :SHOWQ;STATUS command in MPE displays:
>
> ------QUANTUM-------
> QUEUE BASE LIMIT MIN MAX ACTUAL BOOST TIMESLICE
> ----- ---- ----- --- --- ------ ----- ---------
> CQ 152 255 1 2000 40 DECAY 200
> DQ 202 255 2000 2000 2000 DECAY 200
> EQ 240 255 2000 2000 2000 DECAY 200
>
> I don't know why the LIMIT is 250 in Express and the system reports
> 255.
> I'm more concerned about the fact that the LIMIT drops to 250/255 for
> all circular queues. This makes system performance absolutely
> terrible.
>
> There is nothing defined in Global Parameters. I have tried adding our
> standard tuning to that screen but it doesn't fix the problem. I have
> also tried using no config file, with no parameters changed, even
> renaming the default file so it will create a new one, but it still
> does
> the same thing.
>
> I hope you can help me, we use KLA for monitoring and
> single-threading,
> so it's really putting a crimp in our batch scheduling.
>
> Thanks,
> Patrick Santucci
> --
> Patrick Santucci
> Technical Services Systems Programmer
> Kirke-Van Orsdel, Inc.
> mailto:[log in to unmask]
> Visit our site! http://www.kvi-ins.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> "Why was it that when I was young life was complex because
> I lacked experience and now that I'm experienced life is
> complex because I'm not young?" - James Trudeau
|