Growthpower is not Cobol based. It's written in BASIC/3000, with some Fortran and SPL in the SL.
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of HP3000-L automatic digest system
Sent: Wednesday, October 19, 2011 12:01 AM
To: [log in to unmask]
Subject: HP3000-L Digest - 17 Oct 2011 to 18 Oct 2011 (#2011-206)
There are 12 messages totaling 1201 lines in this issue.
Topics of the day:
1. Ldev 7 should be Tape but is assigned to network session (9)
2. HP3K MRP/ERP Apps (COBOL) (3)
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
----------------------------------------------------------------------
Date: Tue, 18 Oct 2011 16:06:31 -0400
From: Cornelia Sellitto <[log in to unmask]>
Subject: Ldev 7 should be Tape but is assigned to network session
Hello List,
CFA's HP3000/A400 running 7.5 pp2, having problems with tape backup. Looks like the LDEV 7 which is defined as tape, has somehow been assigned to a session. They are reporting problems with losing the network connection, had to reset the NSCONTROL a few times. Any ideas?
Thank you,
Connie Sellitto
See session #S15...
JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
#S1 EXEC 20 20 MON 5:21P MANAGER.SYS
#J3 EXEC 10S LP MON 5:22P JINETD,MANAGER.SYS
#J5 EXEC 10S LP MON 5:22P WSTLSNR,MGR.CATFANCY
#J38 EXEC 10S LP TUE 8:07A GRSPEAK,MGR.CATFANCY
#S13 EXEC 5 5 TUE 8:20A DIANEC.CATFANCY
#S14 EXEC 116 116 TUE 8:20A MGR.CATFANCY
#S15 EXEC 7 7 TUE 8:23A CAB.CATFANCY
#S19 EXEC 12 12 TUE 8:34A SHELLY.CATFANCY
#J49 EXEC 10S LP TUE 8:51A WSTP0001,MGR.CATFANCY
#S27 EXEC 19 19 TUE 8:53A MGR.CATFANCY
#S30 EXEC 13 13 TUE 9:02A MGR.CATFANCY
Here's a copy of the sysgen io:
io> ld
LDEV: 1 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/1/1.15.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 2 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/2/1.15.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 3 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/1/0.0.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 6 DEVNAME: OUTDEV: 0
MODE:
ID: LP_PP_ID RSIZE: 66 DEVTYPE:
PP
PATH: 0/0/2/0.16.0 MPETYPE: 32 MPESUBTYPE:
6
CLASS: LP
PP
LDEV: 7 DEVNAME: OUTDEV: 0 MODE:
R
ID: HPC1537A RSIZE: 128 DEVTYPE:
TAPE
PATH: 0/0/2/0.0.0 MPETYPE: 24 MPESUBTYPE:
7
CLASS:
TAPE
LDEV: 10 DEVNAME: OUTDEV: LP MODE:
JA
ID: JOBTAPE_ID RSIZE: 128 DEVTYPE:
TAPE
PATH: 0/0/2/0.17.0 MPETYPE: 24 MPESUBTYPE:
2
CLASS: JOB
JOBTAPE
LDEV: 20 DEVNAME: OUTDEV: 20 MODE:
JAID
ID: C1099A RSIZE: 40 DEVTYPE:
TERM
PATH: 0/0/4/1.0 MPETYPE: 16 MPESUBTYPE:
0
CLASS: CONSOLE
TERM
LDEV: 21 DEVNAME: OUTDEV: 21 MODE:
JAID
ID: C1099A RSIZE: 40 DEVTYPE:
TERM
PATH: 0/0/4/1.1 MPETYPE: 16 MPESUBTYPE:
0
CLASS:
TERM
LDEV: 100/103 NMMGR
LDEV: 105 NMMGR
LDEV: 110/114 NMMGR
LDEV: 116/128 NMMGR
LDEV: 141 NMMGR
io>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 13:10:02 -0700
From: Jack Connor <[log in to unmask]>
Subject: Re: Ldev 7 should be Tape but is assigned to network session
Hi Connie,
I'd say your tape drive has gone south.
If it has a problem, typically on a reboot and doesn't get recognized, it will make that LDEV free for virtual sessions.
If it's in a smart enclosure (slides out), you may want to try shutting down and reseating the drive and rebooting.
If it's an internal drive, I'd call your support folks and have them come out and replace it which will require a shutdown/power down/reboot.
jack
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Cornelia Sellitto
Sent: Tuesday, October 18, 2011 4:07 PM
To: [log in to unmask]
Subject: [HP3000-L] Ldev 7 should be Tape but is assigned to network session
Hello List,
CFA's HP3000/A400 running 7.5 pp2, having problems with tape backup. Looks like the LDEV 7 which is defined as tape, has somehow been assigned to a session. They are reporting problems with losing the network connection, had to reset the NSCONTROL a few times. Any ideas?
Thank you,
Connie Sellitto
See session #S15...
JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
#S1 EXEC 20 20 MON 5:21P MANAGER.SYS
#J3 EXEC 10S LP MON 5:22P JINETD,MANAGER.SYS
#J5 EXEC 10S LP MON 5:22P WSTLSNR,MGR.CATFANCY
#J38 EXEC 10S LP TUE 8:07A GRSPEAK,MGR.CATFANCY
#S13 EXEC 5 5 TUE 8:20A DIANEC.CATFANCY
#S14 EXEC 116 116 TUE 8:20A MGR.CATFANCY
#S15 EXEC 7 7 TUE 8:23A CAB.CATFANCY
#S19 EXEC 12 12 TUE 8:34A SHELLY.CATFANCY
#J49 EXEC 10S LP TUE 8:51A WSTP0001,MGR.CATFANCY
#S27 EXEC 19 19 TUE 8:53A MGR.CATFANCY
#S30 EXEC 13 13 TUE 9:02A MGR.CATFANCY
Here's a copy of the sysgen io:
io> ld
LDEV: 1 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/1/1.15.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 2 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/2/1.15.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 3 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/1/0.0.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 6 DEVNAME: OUTDEV: 0
MODE:
ID: LP_PP_ID RSIZE: 66 DEVTYPE:
PP
PATH: 0/0/2/0.16.0 MPETYPE: 32 MPESUBTYPE:
6
CLASS: LP
PP
LDEV: 7 DEVNAME: OUTDEV: 0 MODE:
R
ID: HPC1537A RSIZE: 128 DEVTYPE:
TAPE
PATH: 0/0/2/0.0.0 MPETYPE: 24 MPESUBTYPE:
7
CLASS:
TAPE
LDEV: 10 DEVNAME: OUTDEV: LP MODE:
JA
ID: JOBTAPE_ID RSIZE: 128 DEVTYPE:
TAPE
PATH: 0/0/2/0.17.0 MPETYPE: 24 MPESUBTYPE:
2
CLASS: JOB
JOBTAPE
LDEV: 20 DEVNAME: OUTDEV: 20 MODE:
JAID
ID: C1099A RSIZE: 40 DEVTYPE:
TERM
PATH: 0/0/4/1.0 MPETYPE: 16 MPESUBTYPE:
0
CLASS: CONSOLE
TERM
LDEV: 21 DEVNAME: OUTDEV: 21 MODE:
JAID
ID: C1099A RSIZE: 40 DEVTYPE:
TERM
PATH: 0/0/4/1.1 MPETYPE: 16 MPESUBTYPE:
0
CLASS:
TERM
LDEV: 100/103 NMMGR
LDEV: 105 NMMGR
LDEV: 110/114 NMMGR
LDEV: 116/128 NMMGR
LDEV: 141 NMMGR
io>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Be sure to ask us about short term and long term rentals on servers, workstations, storage and more!
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 15:12:23 -0500
From: Mark Ranft <[log in to unmask]>
Subject: Re: Ldev 7 should be Tape but is assigned to network session
I bet you a nickel that when booting you had a LLIO error and the drive was not found. (It could be a cabling or SCSI terminator issue.) Therefore the LDev number became available for sessions. A reboot will be needed.
Have any backups worked on LDev 7 since you moved the system?
Mark Ranft
Pro 3K
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 16:25:47 -0400
From: Jeff Kell <[log in to unmask]>
Subject: Re: Ldev 7 should be Tape but is assigned to network session
On 10/18/2011 4:06 PM, Cornelia Sellitto wrote:
> Hello List,
> CFA's HP3000/A400 running 7.5 pp2, having problems with tape backup.
> Looks like the LDEV 7 which is defined as tape, has somehow been
> assigned to a session. They are reporting problems with losing the
> network connection, had to reset the NSCONTROL a few times. Any ideas?
The only time I've seen this happen is when there are boot-up errors with the tape drive, and the device/path is unrecognized. The ldev[s] associated with the path are then removed from the startup configuration and become available for the "non-nailed device pool" that is used by VTserver and Telnet.
If you "showdev tape" does it list ldev 7? (When the above condition occurs, it won't show up in the expected classes either)
Jeff
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 15:42:19 -0500
From: Denys Beauchemin <[log in to unmask]>
Subject: Re: Ldev 7 should be Tape but is assigned to network session
It's going to take much more than a broken drive to get into this problem.
You can boot a system with a tape drive configured but not attached a the ldev will still be associated with the drive. The problem here may be deeper, as Jeff indicates. Something removed it from the configuration table at start up time, and that takes a bad configuration from sysgen or a broken adapter or some such.
After you do the things Jeff suggested, you should go into sysgen and check the configuration for that ldev. Then you will need to reboot and on the way up, you should check the hardware status with mapper(2).
Denys
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Jeff Kell
Sent: Tuesday, October 18, 2011 3:26 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Ldev 7 should be Tape but is assigned to network session
On 10/18/2011 4:06 PM, Cornelia Sellitto wrote:
> Hello List,
> CFA's HP3000/A400 running 7.5 pp2, having problems with tape backup.
> Looks like the LDEV 7 which is defined as tape, has somehow been
> assigned to a session. They are reporting problems with losing the
> network connection, had to reset the NSCONTROL a few times. Any ideas?
The only time I've seen this happen is when there are boot-up errors with the tape drive, and the device/path is unrecognized. The ldev[s] associated with the path are then removed from the startup configuration and become available for the "non-nailed device pool" that is used by VTserver and Telnet.
If you "showdev tape" does it list ldev 7? (When the above condition occurs, it won't show up in the expected classes either)
Jeff
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 14:15:56 -0700
From: Craig Lalley <[log in to unmask]>
Subject: Re: Ldev 7 should be Tape but is assigned to network session
Connie,
When the system was booted, or at boot time, the system could not identify the tape drive. Hence LDEV 7 became available to sessions.
The fix would be to reboot the system and monitor to make sure it identifies the tape drive.
While it could be possible to get the tape drive with out a reboot. It will be difficult.
-Craig
--- On Tue, 10/18/11, Cornelia Sellitto <[log in to unmask]> wrote:
From: Cornelia Sellitto <[log in to unmask]>
Subject: Ldev 7 should be Tape but is assigned to network session
To: [log in to unmask]
Date: Tuesday, October 18, 2011, 1:06 PM
Hello List,
CFA's HP3000/A400 running 7.5 pp2, having problems with tape backup. Looks like the LDEV 7 which is defined as tape, has somehow been assigned to a session. They are reporting problems with losing the network connection, had to reset the NSCONTROL a few times. Any ideas?
Thank you,
Connie Sellitto
See session #S15...
JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
#S1 EXEC 20 20 MON 5:21P MANAGER.SYS
#J3 EXEC 10S LP MON 5:22P JINETD,MANAGER.SYS
#J5 EXEC 10S LP MON 5:22P WSTLSNR,MGR.CATFANCY
#J38 EXEC 10S LP TUE 8:07A GRSPEAK,MGR.CATFANCY
#S13 EXEC 5 5 TUE 8:20A DIANEC.CATFANCY
#S14 EXEC 116 116 TUE 8:20A MGR.CATFANCY
#S15 EXEC 7 7 TUE 8:23A CAB.CATFANCY
#S19 EXEC 12 12 TUE 8:34A SHELLY.CATFANCY
#J49 EXEC 10S LP TUE 8:51A WSTP0001,MGR.CATFANCY
#S27 EXEC 19 19 TUE 8:53A MGR.CATFANCY #S30 EXEC 13 13 TUE 9:02A MGR.CATFANCY
Here's a copy of the sysgen io:
io> ld
LDEV: 1 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/1/1.15.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 2 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/2/1.15.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 3 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/1/0.0.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 6 DEVNAME: OUTDEV: 0
MODE:
ID: LP_PP_ID RSIZE: 66 DEVTYPE:
PP
PATH: 0/0/2/0.16.0 MPETYPE: 32 MPESUBTYPE:
6
CLASS: LP
PP
LDEV: 7 DEVNAME: OUTDEV: 0 MODE:
R
ID: HPC1537A RSIZE: 128 DEVTYPE:
TAPE
PATH: 0/0/2/0.0.0 MPETYPE: 24 MPESUBTYPE:
7
CLASS:
TAPE
LDEV: 10 DEVNAME: OUTDEV: LP MODE:
JA
ID: JOBTAPE_ID RSIZE: 128 DEVTYPE:
TAPE
PATH: 0/0/2/0.17.0 MPETYPE: 24 MPESUBTYPE:
2
CLASS: JOB
JOBTAPE
LDEV: 20 DEVNAME: OUTDEV: 20 MODE:
JAID
ID: C1099A RSIZE: 40 DEVTYPE:
TERM
PATH: 0/0/4/1.0 MPETYPE: 16 MPESUBTYPE:
0
CLASS: CONSOLE
TERM
LDEV: 21 DEVNAME: OUTDEV: 21 MODE:
JAID
ID: C1099A RSIZE: 40 DEVTYPE:
TERM
PATH: 0/0/4/1.1 MPETYPE: 16 MPESUBTYPE:
0
CLASS:
TERM
LDEV: 100/103 NMMGR
LDEV: 105 NMMGR
LDEV: 110/114 NMMGR
LDEV: 116/128 NMMGR
LDEV: 141 NMMGR
io>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 14:17:55 -0700
From: Jack Connor <[log in to unmask]>
Subject: Re: Ldev 7 should be Tape but is assigned to network session
Agree...a DOWN of 7 and check the cables/power cycle the drive/UP 7 and mount a tape to see if the "Unlabeled tape mounted on LDEV 7" appears on the console....sometimes it works. Most often, though, not.
jack
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Craig Lalley
Sent: Tuesday, October 18, 2011 5:16 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Ldev 7 should be Tape but is assigned to network session
Connie,
When the system was booted, or at boot time, the system could not identify the tape drive. Hence LDEV 7 became available to sessions.
The fix would be to reboot the system and monitor to make sure it identifies the tape drive.
While it could be possible to get the tape drive with out a reboot. It will be difficult.
-Craig
--- On Tue, 10/18/11, Cornelia Sellitto <[log in to unmask]> wrote:
From: Cornelia Sellitto <[log in to unmask]>
Subject: Ldev 7 should be Tape but is assigned to network session
To: [log in to unmask]
Date: Tuesday, October 18, 2011, 1:06 PM
Hello List,
CFA's HP3000/A400 running 7.5 pp2, having problems with tape backup. Looks like the LDEV 7 which is defined as tape, has somehow been assigned to a session. They are reporting problems with losing the network connection, had to reset the NSCONTROL a few times. Any ideas?
Thank you,
Connie Sellitto
See session #S15...
JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
#S1 EXEC 20 20 MON 5:21P MANAGER.SYS
#J3 EXEC 10S LP MON 5:22P JINETD,MANAGER.SYS
#J5 EXEC 10S LP MON 5:22P WSTLSNR,MGR.CATFANCY
#J38 EXEC 10S LP TUE 8:07A GRSPEAK,MGR.CATFANCY
#S13 EXEC 5 5 TUE 8:20A DIANEC.CATFANCY
#S14 EXEC 116 116 TUE 8:20A MGR.CATFANCY
#S15 EXEC 7 7 TUE 8:23A CAB.CATFANCY
#S19 EXEC 12 12 TUE 8:34A SHELLY.CATFANCY
#J49 EXEC 10S LP TUE 8:51A WSTP0001,MGR.CATFANCY
#S27 EXEC 19 19 TUE 8:53A MGR.CATFANCY
#S30 EXEC 13 13 TUE 9:02A MGR.CATFANCY
Here's a copy of the sysgen io:
io> ld
LDEV: 1 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/1/1.15.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 2 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/2/1.15.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 3 DEVNAME: OUTDEV: 0
MODE:
ID: LVDDISK RSIZE: 128 DEVTYPE:
DISC
PATH: 0/0/1/0.0.0 MPETYPE: 4 MPESUBTYPE:
2
CLASS: DISC
SPOOL
LDEV: 6 DEVNAME: OUTDEV: 0
MODE:
ID: LP_PP_ID RSIZE: 66 DEVTYPE:
PP
PATH: 0/0/2/0.16.0 MPETYPE: 32 MPESUBTYPE:
6
CLASS: LP
PP
LDEV: 7 DEVNAME: OUTDEV: 0 MODE:
R
ID: HPC1537A RSIZE: 128 DEVTYPE:
TAPE
PATH: 0/0/2/0.0.0 MPETYPE: 24 MPESUBTYPE:
7
CLASS:
TAPE
LDEV: 10 DEVNAME: OUTDEV: LP MODE:
JA
ID: JOBTAPE_ID RSIZE: 128 DEVTYPE:
TAPE
PATH: 0/0/2/0.17.0 MPETYPE: 24 MPESUBTYPE:
2
CLASS: JOB
JOBTAPE
LDEV: 20 DEVNAME: OUTDEV: 20 MODE:
JAID
ID: C1099A RSIZE: 40 DEVTYPE:
TERM
PATH: 0/0/4/1.0 MPETYPE: 16 MPESUBTYPE:
0
CLASS: CONSOLE
TERM
LDEV: 21 DEVNAME: OUTDEV: 21 MODE:
JAID
ID: C1099A RSIZE: 40 DEVTYPE:
TERM
PATH: 0/0/4/1.1 MPETYPE: 16 MPESUBTYPE:
0
CLASS:
TERM
LDEV: 100/103 NMMGR
LDEV: 105 NMMGR
LDEV: 110/114 NMMGR
LDEV: 116/128 NMMGR
LDEV: 141 NMMGR
io>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Be sure to ask us about short term and long term rentals on servers, workstations, storage and more!
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 19:47:15 -0400
From: Gilles Schipper <[log in to unmask]>
Subject: Re: Ldev 7 should be Tape but is assigned to network session
Your tape drive is probably fine.
I've seen this happen frequently.
Always under the following conditions:
While booting the system, a tape is loaded into the drive.
This combination of events, depending upon the timing, could easily result in an LLIO error caused by the i/o system not recognizing the tape drive while it is active during the "i/o scan" occurring at bootup.
After experiencing it several times, I try to infoem my clients to NEVER load a tape while booting the system.
I also recommend NOT booting the system during a thunderstorm - but that's another story.
At 04:06 PM 2011-10-18, Cornelia Sellitto wrote:
>Hello List,
>CFA's HP3000/A400 running 7.5 pp2, having problems with tape backup.
>Looks like the LDEV 7 which is defined as tape, has somehow been
>assigned to a session. They are reporting problems with losing the
>network connection, had to reset the NSCONTROL a few times. Any ideas?
>
>Thank you,
>Connie Sellitto
>
>See session #S15...
>JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
>
>#S1 EXEC 20 20 MON 5:21P MANAGER.SYS
>#J3 EXEC 10S LP MON 5:22P JINETD,MANAGER.SYS
>#J5 EXEC 10S LP MON 5:22P WSTLSNR,MGR.CATFANCY
>#J38 EXEC 10S LP TUE 8:07A GRSPEAK,MGR.CATFANCY
>#S13 EXEC 5 5 TUE 8:20A DIANEC.CATFANCY
>#S14 EXEC 116 116 TUE 8:20A MGR.CATFANCY
>#S15 EXEC 7 7 TUE 8:23A CAB.CATFANCY
>#S19 EXEC 12 12 TUE 8:34A SHELLY.CATFANCY
>#J49 EXEC 10S LP TUE 8:51A WSTP0001,MGR.CATFANCY
>#S27 EXEC 19 19 TUE 8:53A MGR.CATFANCY
>#S30 EXEC 13 13 TUE 9:02A MGR.CATFANCY
>
>
>Here's a copy of the sysgen io:
> io> ld
> LDEV: 1 DEVNAME: OUTDEV: 0
>MODE:
> ID: LVDDISK RSIZE: 128 DEVTYPE:
>DISC
> PATH: 0/0/1/1.15.0 MPETYPE: 4 MPESUBTYPE:
>2
>CLASS: DISC
>SPOOL
>
>
> LDEV: 2 DEVNAME: OUTDEV: 0
>MODE:
> ID: LVDDISK RSIZE: 128 DEVTYPE:
>DISC
> PATH: 0/0/2/1.15.0 MPETYPE: 4 MPESUBTYPE:
>2
>CLASS: DISC
>SPOOL
>
>
> LDEV: 3 DEVNAME: OUTDEV: 0
>MODE:
> ID: LVDDISK RSIZE: 128 DEVTYPE:
>DISC
> PATH: 0/0/1/0.0.0 MPETYPE: 4 MPESUBTYPE:
>2
>CLASS: DISC
>SPOOL
>
>
> LDEV: 6 DEVNAME: OUTDEV: 0
>MODE:
> ID: LP_PP_ID RSIZE: 66 DEVTYPE:
>PP
> PATH: 0/0/2/0.16.0 MPETYPE: 32 MPESUBTYPE:
>6
>CLASS: LP
>PP
>
>
> LDEV: 7 DEVNAME: OUTDEV: 0 MODE:
>R
> ID: HPC1537A RSIZE: 128 DEVTYPE:
>TAPE
> PATH: 0/0/2/0.0.0 MPETYPE: 24 MPESUBTYPE:
>7
>CLASS:
>TAPE
>
>
> LDEV: 10 DEVNAME: OUTDEV: LP MODE:
>JA
> ID: JOBTAPE_ID RSIZE: 128 DEVTYPE:
>TAPE
> PATH: 0/0/2/0.17.0 MPETYPE: 24 MPESUBTYPE:
>2
>CLASS: JOB
>JOBTAPE
>
>
> LDEV: 20 DEVNAME: OUTDEV: 20 MODE:
>JAID
> ID: C1099A RSIZE: 40 DEVTYPE:
>TERM
> PATH: 0/0/4/1.0 MPETYPE: 16 MPESUBTYPE:
>0
>CLASS: CONSOLE
>TERM
>
>
> LDEV: 21 DEVNAME: OUTDEV: 21 MODE:
>JAID
> ID: C1099A RSIZE: 40 DEVTYPE:
>TERM
> PATH: 0/0/4/1.1 MPETYPE: 16 MPESUBTYPE:
>0
>CLASS:
>TERM
>
>
> LDEV: 100/103 NMMGR
>
> LDEV: 105 NMMGR
>
> LDEV: 110/114 NMMGR
>
> LDEV: 116/128 NMMGR
>
> LDEV: 141 NMMGR
>
> io>
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Tel: 416.702.7900
email: [log in to unmask] web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 19:50:42 -0400
From: Gilles Schipper <[log in to unmask]>
Subject: Re: Ldev 7 should be Tape but is assigned to network session
I should have added:
To get the system to again recongnize ldev 7, you will need to perform another START NORECOVERY, ensuring, of course, no loading (or
unloading) activity on the tape drive.
At 04:06 PM 2011-10-18, Cornelia Sellitto wrote:
>Hello List,
>CFA's HP3000/A400 running 7.5 pp2, having problems with tape backup.
>Looks like the LDEV 7 which is defined as tape, has somehow been
>assigned to a session. They are reporting problems with losing the
>network connection, had to reset the NSCONTROL a few times. Any ideas?
>
>Thank you,
>Connie Sellitto
>
>See session #S15...
>JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
>
>#S1 EXEC 20 20 MON 5:21P MANAGER.SYS
>#J3 EXEC 10S LP MON 5:22P JINETD,MANAGER.SYS
>#J5 EXEC 10S LP MON 5:22P WSTLSNR,MGR.CATFANCY
>#J38 EXEC 10S LP TUE 8:07A GRSPEAK,MGR.CATFANCY
>#S13 EXEC 5 5 TUE 8:20A DIANEC.CATFANCY
>#S14 EXEC 116 116 TUE 8:20A MGR.CATFANCY
>#S15 EXEC 7 7 TUE 8:23A CAB.CATFANCY
>#S19 EXEC 12 12 TUE 8:34A SHELLY.CATFANCY
>#J49 EXEC 10S LP TUE 8:51A WSTP0001,MGR.CATFANCY
>#S27 EXEC 19 19 TUE 8:53A MGR.CATFANCY
>#S30 EXEC 13 13 TUE 9:02A MGR.CATFANCY
>
>
>Here's a copy of the sysgen io:
> io> ld
> LDEV: 1 DEVNAME: OUTDEV: 0
>MODE:
> ID: LVDDISK RSIZE: 128 DEVTYPE:
>DISC
> PATH: 0/0/1/1.15.0 MPETYPE: 4 MPESUBTYPE:
>2
>CLASS: DISC
>SPOOL
>
>
> LDEV: 2 DEVNAME: OUTDEV: 0
>MODE:
> ID: LVDDISK RSIZE: 128 DEVTYPE:
>DISC
> PATH: 0/0/2/1.15.0 MPETYPE: 4 MPESUBTYPE:
>2
>CLASS: DISC
>SPOOL
>
>
> LDEV: 3 DEVNAME: OUTDEV: 0
>MODE:
> ID: LVDDISK RSIZE: 128 DEVTYPE:
>DISC
> PATH: 0/0/1/0.0.0 MPETYPE: 4 MPESUBTYPE:
>2
>CLASS: DISC
>SPOOL
>
>
> LDEV: 6 DEVNAME: OUTDEV: 0
>MODE:
> ID: LP_PP_ID RSIZE: 66 DEVTYPE:
>PP
> PATH: 0/0/2/0.16.0 MPETYPE: 32 MPESUBTYPE:
>6
>CLASS: LP
>PP
>
>
> LDEV: 7 DEVNAME: OUTDEV: 0 MODE:
>R
> ID: HPC1537A RSIZE: 128 DEVTYPE:
>TAPE
> PATH: 0/0/2/0.0.0 MPETYPE: 24 MPESUBTYPE:
>7
>CLASS:
>TAPE
>
>
> LDEV: 10 DEVNAME: OUTDEV: LP MODE:
>JA
> ID: JOBTAPE_ID RSIZE: 128 DEVTYPE:
>TAPE
> PATH: 0/0/2/0.17.0 MPETYPE: 24 MPESUBTYPE:
>2
>CLASS: JOB
>JOBTAPE
>
>
> LDEV: 20 DEVNAME: OUTDEV: 20 MODE:
>JAID
> ID: C1099A RSIZE: 40 DEVTYPE:
>TERM
> PATH: 0/0/4/1.0 MPETYPE: 16 MPESUBTYPE:
>0
>CLASS: CONSOLE
>TERM
>
>
> LDEV: 21 DEVNAME: OUTDEV: 21 MODE:
>JAID
> ID: C1099A RSIZE: 40 DEVTYPE:
>TERM
> PATH: 0/0/4/1.1 MPETYPE: 16 MPESUBTYPE:
>0
>CLASS:
>TERM
>
>
> LDEV: 100/103 NMMGR
>
> LDEV: 105 NMMGR
>
> LDEV: 110/114 NMMGR
>
> LDEV: 116/128 NMMGR
>
> LDEV: 141 NMMGR
>
> io>
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Tel: 416.702.7900
email: [log in to unmask] web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 16:55:16 -0700
From: "Penney, John" <[log in to unmask]>
Subject: HP3K MRP/ERP Apps (COBOL)
Dear Listers:
A brief query, I can only Google three (3) HP3K MRP/ERP systems (ex. ManMan of course) on Google- IBS3000, Visibility, AMAPS+PLUS. Looking for any source(s) of information, esp any COBOL based.
Thanks and appreciate your continued courtesy.
John M Penney
(360)789-8159
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 17:39:41 -0700
From: Jack Connor <[log in to unmask]>
Subject: Re: HP3K MRP/ERP Apps (COBOL)
GrowthPower would be a COBOL based MRP package. And MM/3000.
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Penney, John
Sent: Tuesday, October 18, 2011 7:55 PM
To: [log in to unmask]
Subject: [HP3000-L] HP3K MRP/ERP Apps (COBOL)
Dear Listers:
A brief query, I can only Google three (3) HP3K MRP/ERP systems (ex. ManMan of course) on Google- IBS3000, Visibility, AMAPS+PLUS. Looking for any source(s) of information, esp any COBOL based.
Thanks and appreciate your continued courtesy.
John M Penney
(360)789-8159
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Be sure to ask us about short term and long term rentals on servers, workstations, storage and more!
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
Date: Tue, 18 Oct 2011 22:37:49 -0400
From: Peter Cassell <[log in to unmask]>
Subject: Re: HP3K MRP/ERP Apps (COBOL)
There's also a HP3K version of MCBA that's COBOL-based. It's an ERP/financial package.
Peter
Peter Cassell
Serasoft, Inc.
(603) 528-7605 (Office)
(603) 387-9186 (Cell)
(603) 528-1055 (FAX)
[log in to unmask]
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Penney, John
Sent: Tuesday, October 18, 2011 7:55 PM
To: [log in to unmask]
Subject: [HP3000-L] HP3K MRP/ERP Apps (COBOL)
Dear Listers:
A brief query, I can only Google three (3) HP3K MRP/ERP systems (ex. ManMan of course) on Google- IBS3000, Visibility, AMAPS+PLUS. Looking for any
source(s) of information, esp any COBOL based.
Thanks and appreciate your continued courtesy.
John M Penney
(360)789-8159
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------
End of HP3000-L Digest - 17 Oct 2011 to 18 Oct 2011 (#2011-206)
***************************************************************
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
