Pascal,
I will notify patch owner about that situation.
--
==============
Denis St-Amand
(remove removeit from email address)
"Pascal Luyckx" <[log in to unmask]> wrote in message
news:goKdnZPIN_7YARfcRVn-tA@fidnet.com...
> Denis,
>
> I was able to kill the diagmond process with your instructions.
> Just one remark, I had to use the kill command without the -n option.
> After that I did a patchix phase2 and the job gave me another error:
> unable to delete CSTM.PUB.SYS. This seems logic to me because the first
run
> of the job purged that file already! Did a rebuild of this file and
executed
> once again patchix phase2. The job executed ok now. The only thing I have
to
> do now is reboot the machine tomorrow morning.
>
> I wonder if hp is testing patch installations!? I checked if there were
> special instructions for installing patch ODIMXQ2B or ODIMXQ2C: NO SPECIAL
> INSTRUCTIONS PROVIDED FOR THIS PATCH!
>
> Thanks for your help.
>
> Regards,
>
> Pascal
>
> -----Original Message-----
> From: Denis St-Amand
> To: [log in to unmask]
> Sent: 11/4/04 7:02 PM
> Subject: Re: [HP3000-L] STMXL file in use when installing HP patch OSPM58A
> and patch depe ndencies
>
> Pascal,
>
> Go into Posix Shell (XEQ SH.HPBIN.SYS -L), then use following commands:
>
> Shell/iX>ps -ef | grep stm <= It will show you remaining stm
> processes
> Shell/iX>kill -n pid <= replace pid by diagmond process number
> Shell/iX>ps -ef | grep stm <= Should no longer show stm processese
>
> By the way, cstm daemons are automatically lauched at system restart
> (when
> you see message "successfully launched diagnostic monitor" message at
> console so using START NORECOVERY NOSYSSTART will not forbid those
> starting
> !
>
>
> Hope this will help!
>
> --
> ==============
> Denis St-Amand
> (remove removeit from email address)
> "Pascal Luyckx" <[log in to unmask]> wrote in message
> news:4u2dnQiSdPVyyBfcRVn-tA@fidnet.com...
> > Craig,
> >
> > This is also the first time I have this problem.
> > I did a START NORECOVERY NOSYSSTART and I also removed the Netbase
> shell.
> >
> > I had a problem with predictive (error 200) and this patch should fix
> this
> > error.
> >
> > Regards,
> >
> > Pascal
> >
> > -----Original Message-----
> > From: Craig Lalley [mailto:[log in to unmask]]
> > Sent: Thursday, November 04, 2004 5:12 PM
> > To: Pascal Luyckx
> > Subject: Re: STMXL file in use when installing HP patch OSPM58A and
> patch
> > depe ndencies
> >
> > Pascal,
> >
> > Believe it or not, I can honestly say, I have never had this problem.
> >
> > Are you doing a START NORECOVERY NOSYSSTART?
> >
> > What does the OSPM58A patch fix?
> >
> > -Craig
> >
> >
> > --- Pascal Luyckx <[log in to unmask]> wrote:
> >
> > > Also tried STMSHUT, but diagmond process keeps running.
> > >
> > > Pascal
> > >
> > > -----Original Message-----
> > > From: Craig Lalley [mailto:[log in to unmask]]
> > > Sent: Thursday, November 04, 2004 5:05 PM
> > > To: Pascal Luyckx
> > > Subject: Re: STMXL file in use when installing HP patch OSPM58A and
> > > patch depe ndencies
> > >
> > > STMSHUT.DIAG.SYS ?
> > >
> > > -Craig
> > >
> > >
> > > --- Pascal Luyckx <[log in to unmask]> wrote:
> > >
> > > > Hi Craig,
> > > >
> > > > No, I did not start the network before running Patch/iX the second
> time.
> > > > I just rebooted the system, did a startspool and streams on the
> > > > console and launched patchix for the second time on the console.
> > > >
> > > > Any other ideas?
> > > >
> > > > Regards,
> > > >
> > > > Pascal
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Craig Lalley [mailto:[log in to unmask]]
> > > > Sent: Thursday, November 04, 2004 3:41 PM
> > > > To: Pascal Luyckx
> > > > Subject: Re: STMXL file in use when installing HP patch OSPM58A
> and
> > > > patch depe ndencies
> > > >
> > > > Pascal,
> > > >
> > > > Did you start the network before running Patch/iX a second time?
> > > >
> > > > You should only
> > > >
> > > > Logon on (console)
> > > >
> > > > :startspool lp
> > > > :streams 10
> > > >
> > > > :run patchix
> > > >
> > > > That should work
> > > >
> > > > -Craig
> > > >
> > > > --- Pascal Luyckx <[log in to unmask]> wrote:
> > > >
> > > > > Hi HP3000-L list,
> > > > >
> > > > > I downloaded patch OSPMX58A and its patch dependencies for
> MPE/iX
> > > > > 7.0 from the it resource center and installed it with Patch/iX.
> I
> > > > > updated the system from the CSLT tape and started the second
> phase
> > > > > of Patch/iX. Patch/iX then streams 3 installation jobs, but I
> > > > > encounter a problem with the installation of patch ODIMXQ2C. The
> > > > > following message is displayed on the
> > > > > console:
> > > > >
> > > > > *********************************************
> > > > > * STMXL.DIAG.SYS library is in use. *
> > > > > * Critical diagnostics files will not be *
> > > > > * able to be replaced if they are in use. *
> > > > > * ODIMXQ2 C is unable to continue. *
> > > > > *********************************************
> > > > >
> > > > > I check who is accessing the STMXL file :
> > > > >
> > > > > :listf stmxl.diag.sys,9
> > > > > ********************
> > > > > FILE: STMXL.DIAG.SYS
> > > > > 1 Accessor(O:1,P:1,L:0,W:0,R:1),Share
> > > > > system MANAGER.SYS P:1,L:0,W:1,R:1 LDEV:
> > > > > #P52 (/usr/sbin/stm/uut/bin/sys/diagmond)
> > > > > ACCESS: R,X,L-gmulti REC#: 0 FNUM: 22
> > > > > LOCKS: none
> > > > >
> > > > > I try to stop the diagmond process by executing
> STMSHUT.DIAG.SYS,
> > > > > but the diagmond process keeps on running. I then try to kill
> the
> > > > > process with the ABORTPROC command, but then my session is
> aborted.
> > > > >
> > > > > Is there any other way of killing the diagmond process?
> > > > >
> > > > > Regards,
> > > > >
> > > > > Pascal Luyckx
> > > > > Cheops technology nv
> > > > >
> > > > > * To join/leave the list, search archives, change list settings,
> *
> > > > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html
> *
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > > __________________________________
> > > > Do you Yahoo!?
> > > > Check out the new Yahoo! Front Page.
> > > > www.yahoo.com
> > > >
> > > > * To join/leave the list, search archives, change list settings, *
> > > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> > > >
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Check out the new Yahoo! Front Page.
> > > www.yahoo.com
> > >
> > > * To join/leave the list, search archives, change list settings, *
> > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> > >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
