Thanks very much to Günter and Steve for their responses. On down the
troubleshooting path I go :-).
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Günter Kuhn
Sent: Thursday, August 05, 2004 3:21 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] DTC Question
Hi Dan,
according to my very old HP2340 Manual, code C1 means:
Timeout, no response from the host computer or OpenView workstation to a
download request.
Dan Barnes schrieb:
> First off, my apologies for not looking this up first.
>
> I got an emergency call while I was away from home and my computer, about
> an issue with a DTC that a client was trying to swap out in a network
> change. The change did not go well, so they backed out.
>
> This one DTC did not come back to life, with a code of 'C1' being
> displayed. I do not knwo if it is a 16, 48, or 72, as I got contacted by
a
> third party. I have to get up early and talk with them in the morning.
In
> leiu of the search of manuals I will undertake after stealing a few hours
> of sleep, I thought I would ask this noble group for aid in understanding
> what the 'C1' code being displayed means.
>
> TIA,
> Dan
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
--
Mit freundlichen Grüßen / Best regards
Günter Kuhn
SSD IT Consulting GmbH
Greppen, Switzerland
www.ssd-it.ch
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|