HP3000-L Archives

October 1999, Week 1

HP3000-L@RAVEN.UTC.EDU
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Reset ldev 21
From:
Rick Clark <[log in to unmask]>
Reply To:
Rick Clark <[log in to unmask]>
Date:
Wed, 6 Oct 1999 11:17:35 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (71 lines) 
Which defeats the purpose of setting up the remote console. You have two
possible solutions... Web console or configure PS to use a modem
attached to a DTC port.
Right now I am using the latter, whith high hopes of moving to the first
solution in my lifetime.....

Rick Clark
Senior Analsyt
WW&R
Cleveland, Ohio


Tom Madigan wrote:
>
> Before you go through the hassle of getting a password from HPRC, make sure that your remote console is turned off; otherwise, LDEV 21 will not be available:
>
> CTRL-B
> >DR
> >CO
>
> Tom Madigan
> HP Systems Administrator
> International Communications Research, Inc.
> Media, PA  19063
>
> >>> Gilles Schipper <[log in to unmask]> Wednesday, October 06, 1999 9:20:34 AM >>>
> In order to reset the internal modem, you need a license to run the
> consolan diagnostic.
>
> Assuming you have the appropriate password to enable the license, do the
> following:
>
> :hello manager.sys
> :sysdiag
> consolan pdev=10/4/0 section=2(23)
>
> You will be asked to choose which port to reset. Choose the remote port -
> not the console port.
>
> The pdev will change according to which model HP3000 you have. 10/4/0
> should be the correct path for your 969.
>
> At 09:31 AM 1999-10-06 +0200, Johan BEGHEIN wrote:
> >Hello,
> >
> >I have a 969/200 box, with an internal modem on ldev 21.
> >
> >Predictive wants to do a call to the support center, but it can't fopen
> >ldev21.
> >
> >Is there a way to do a reset of the ldev21 port, or the modem, without
> >bringing down the system.
> >
> >I already tried with sysdiag/termdsm/reset/ldev, also with Openview DTC
> >manager/ ldev reset, but it seems this utilities aren't supported on this
> >port.
> >
> >Ant help would be appreciated.
> >
> >Thank You.
> >
> >
> ---------------------------------------------------------------------------
> Gilles Schipper
> GSA Inc.
> HP3000 & HP9000 System Administration Specialists
> 300 John Street, Box 87651   Thornhill, ON Canada L3T 7R4
> Voice: 905.889.3000     Fax: 905.889.3001
> Internet:  [log in to unmask]
> ---------------------------------------------------------------------------

ATOM RSS1 RSS2