Subject: | |
From: | |
Reply To: | |
Date: | Wed, 17 Jan 2024 15:47:50 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
In your jinetd.net job change the run command to read:
!run inetd.net.sys;pri=cs;info="-l
Attempted connections will appear in the $STDLIST of the job.
You won't get disconnections however. And there is no correlation
between an attempted connection and a log on. You'd have to compare it
with the console. You definitely get the IP address however.
(One way would be to use MPEX and do a PRINTO;WAIT on the job and have
the CONSOLE to the same window at the same time, that would be active
monitoring.)
For FTP logging put this BEFORE the run command of inetd.net.sys, you
can see where it goes:
!build ftplog.arpa.sys;rec=-256,,f,ascii;disc=4096
But FTP attempts also show up at the CONSOLE with the IP address.
On 1/17/24 14:24, Stanfield, Randy (Carrollton, TX) wrote:
> Does anyone remember if we have a way to LOG the TELNET connections to the HP3000. I don’t want full logging just Initiation connection and IP address and Dissconnect time for the IP address. Similar to what you can get with FTP Logging?
>
> veritiv.com
> RandyStanfield
> Senior IT Architect Infrastructure
> Carrollton•TX
> (972)982-3621
> © 2023 Fortune Media IP Limited. Used under license.
> This email may contain confidential or privileged information. Unless you are the intended
> recipient, delete this email immediately and contact the sender at the address above.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
--
Tracy Johnson
BT
NNNN
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|