John,
Just some suggestions...
Try logging on at MANAGER.SYS;HIPRI;PRI=BS;PARM=-1
The BS to give you the best shot at the CPU and PARM=-1 to skip the logon UDC.
If you can get logged on, or get to a colon prompt from a different session, check to see if there is any free space on the system volume.
Also, OPENQ @, and STARTSPOOL LP
Good Luck,
-Craig
--- On Thu, 7/22/10, John Pitman <[log in to unmask]> wrote:
From: John Pitman <[log in to unmask]>
Subject: unable to start new session
To: [log in to unmask]
Date: Thursday, July 22, 2010, 5:00 PM
N4000, mpe 7.5
Last look, about 12 sessions, couple of jobs.
Now when starting a new session, enter the password, no further response.
Console is OK, but logon attempts there give same result. Ctrl-b works ok . No msgs on console.
I do recall a day or so ago doing a "console 21" and probably not bringing it back to 20 - could this cause problem, and if so, how do I fix it?
System is running, seeing disc activity in a normal looking pattern.
Can telnet, but same result at login attempt.
Any suggestions please?
Thanks
John
________________________________
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
