TGIF!

Since I'm still about 2 years from final migration on our 969K220, I was able to convince the powers that be that we should upgrade to a 100MB network card.  It helped that we have had two old hubs die and only have 1 left with a thin LAN connection.

Things have been going well since I installed it a couple of weeks ago.

Until this week.  Since the upgrade, the jobs have been running quickly and printing right away.

Now there seems to be a pause of sometimes 2 minutes before the report prints after it shows completed on the screen.

I checked the port on our switch and it is set to 100/full.

NMMGR shows 100/full.

All of our printers are Network printers.

Is there some other setting in NMMGR I should be looking at or maybe should have changed when I installed the card?

The card is:
A3495A  HP 100Base-T NIC for MPE 9x9

Any ideas would be greatly appreciated.

Thanks.

Steve
Steve Davidek
Operations & Systems Administrator
City of Sparks, Nevada
775.353.1671

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *