Unfortunately the drive in question didn't show a fault and thus we have no
idea which drive to replace. And the bad sector message moved from ldev 54
to 56.
Current status: so we tried to do an install using boot alt path and still
get the crash message, except now it doesn't show message "start aggregate
recovery of mpexl set" and goes directly to "userlog aggregate recovery"
then aggregate recovery of private volume then crash message. Our hardware
guy and myself both of us with 20+ years on this platform have never seen
this happen. What is causing this to crash? All devices show as being
mounted, all paths are there, we are stumped. He will attempt to hook a
different VA and bridge to see if that gets us past the crash.
Keep the ideas coming please. Is a test server but ppl are waiting...but I
need sleep...
Wes
On Apr 1, 2015 5:03 PM, "Jack Connor" <[log in to unmask]>
wrote:
> If you got a bad sector message, Wes, doing the install is a waste of time
> if you didn't replace the failed drive.
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
> Behalf Of Wes S
> Sent: Wednesday, April 01, 2015 5:40 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] system abort
>
> I appreciate the help, been on this for 4 hours already and have not
> received any viable solution. I just started the install command from alt
> boot path and rebuild it. Is test and just taking longer by waiting.
>
> Thanks for the help folks. LL MPE!
> On Apr 1, 2015 4:07 PM, "Wes S" <[log in to unmask]> wrote:
>
> > Yep, SCSI from processor to bridge, fiber from bridge to brocade
> > switch, fiber from switch to VA.
> >
> > We brought system up in single disk mode and looking at sysgen. All
> > ldevs are there.
> > On Apr 1, 2015 4:02 PM, "Jim Maher" <[log in to unmask]> wrote:
> >
> >> You should have a SCSI bridge. It’s a small box that converts SCSI to
> >> fiber.
> >>
> >>
> >>
> >> *From:* Wes S [mailto:[log in to unmask]]
> >> *Sent:* Wednesday, April 01, 2015 1:59 PM
> >> *To:* Jim Maher
> >> *Cc:* [log in to unmask]
> >> *Subject:* RE: [HP3000-L] system abort
> >>
> >>
> >>
> >> A6188A - 7100
> >>
> >> On Apr 1, 2015 3:56 PM, "Jim Maher" <[log in to unmask]> wrote:
> >>
> >> You said you are using a va array on a 969. What model? Also are you
> >> using a SCSI/fc bridge?
> >>
> >> -----Original Message-----
> >> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
> >> Behalf Of Wes S
> >> Sent: Wednesday, April 01, 2015 1:51 PM
> >> To: [log in to unmask]
> >> Subject: Re: [HP3000-L] system abort
> >>
> >> VA is in ready state. We have power cycled all the hardware, had to
> >> bring it up in a particular order. Tried booting 5 or 6 times now and
> >> crashes when it gets to aggregate recovery of private volume set.
> >> On Apr 1, 2015 3:48 PM, "Ryan C. Melander" <[log in to unmask]> wrote:
> >>
> >> > VA's can be finicky, I would reboot VA. Before reloading anything.
> >> > Is the VA in a ready state? Anything showing in the VA logs?
> >> >
> >> >
> >> > Sent from my Verizon Wireless 4G LTE smartphone
> >> >
> >> >
> >> > -------- Original message --------
> >> > From: Wes S <[log in to unmask]>
> >> > Date: 04/01/2015 1:44 PM (GMT-08:00)
> >> > To: [log in to unmask]
> >> > Subject: Re: [HP3000-L] system abort
> >> >
> >> > Mapper shows all devices are there. We did that a while ago...:)
> >> > On Apr 1, 2015 3:42 PM, "Mark Ranft" <[log in to unmask]> wrote:
> >> >
> >> > > The first thing I would do is BO PRI and instead of START
> >> > > NORECOVERY. I would run ODE MAPPER. (Note: This is MAPPER2 on
> >> newer system).
> >> > >
> >> > > Hint: At ISL> prompt type 'RUN ODE MAPPER'
> >> > >
> >> > > Verify you can see all the disks you think you should see.
> >> > >
> >> > > Mark Ranft
> >> > > Pro 3K
> >> > >
> >> > >
> >> >
> >> > * To join/leave the list, search archives, change list settings, *
> >> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >> >
> >>
> >> * To join/leave the list, search archives, change list settings, *
> >> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >>
> >>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> Please ask us about Cloud Backup and Disaster Recovery services for your
> Windows, Linux or Legacy Systems.
>
> CONFIDENTIALITY NOTICE: This communication with its contents may contain
> confidential information. It is solely for the use of the intended
> recipient(s). Unauthorized interception, review, use or disclosure is
> prohibited and may violate applicable laws including the Electronic
> Communications Privacy Act. If you are not the intended recipient, please
> contact the sender and destroy all copies of the communication.
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
