HP3000-L Archives

July 2011, Week 4

HP3000-L@RAVEN.UTC.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Craig Lalley <[log in to unmask]>
Reply To:
Craig Lalley <[log in to unmask]>
Date:
Wed, 27 Jul 2011 14:49:14 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (117 lines)
John,

Just a guess, but, I think you should comment out the line for TFTP in INETDCNF.

Trivial File Transfer Protocol, is used to load firmware to some switches, older printers etc...

I would comment out all the lines except possibly FTP and or TELNET.

-Craig


--- On Wed, 7/27/11, John Pitman <[log in to unmask]> wrote:

> From: John Pitman <[log in to unmask]>
> Subject: Re: Console Error on JINETD job after adding a DLT drive
> To: [log in to unmask]
> Date: Wednesday, July 27, 2011, 2:44 PM
> Craig,
> While you are here, looking at FTP, lately I am seeing msgs
> on console from JINETD about
> Getpwnam USER.TFTP    no such user
> 
> Or similar. Any idea what that's about please??
> 
> Regards,
> 
> John Pitman
> 
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]]
> On Behalf Of Craig Lalley
> Sent: Thursday, 28 July 2011 7:19 AM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] Console Error on JINETD job after
> adding a DLT drive
> 
> Chuck,
> 
> In the message,
> 
> 16:24 /#J1/52/stat on "/etc/bootptab": No such file or
> directory
> 
> The 52, is for the PIN number not the tape drive.
> 
> Job #J1 is probably JINETD.NET.SYS
> 
> If you look at the configuration file
> 
> INETDCNF.NET.SYS there is a line for "bootps"
> 
> Comment out that line and the problem should go away.
> 
> -Craig
> 
> 
> --- On Wed, 7/27/11, Chuck Trites <[log in to unmask]>
> wrote:
> 
> > From: Chuck Trites <[log in to unmask]>
> > Subject: Console Error on JINETD job after adding a
> DLT drive
> > To: [log in to unmask]
> > Date: Wednesday, July 27, 2011, 1:37 PM Hi Everyone,
> >
> >   I had to install a DLT drive to read
> a client's backup tape on my
> > 3000.  After adding the DLT and board to
> accommodate the drive, an
> > error has been coming up on the console constantly.
> 16:24 /#J1/52/stat
> > on
> > "/etc/bootptab": No such file or directory
> >   How can I get rid of this
> error?  Can I change something on the
> > configuration of the drive or Path of the tape drives
> which is 52, or
> > can I get a copy of the file it's looking for? 
> Not a biggie, but an
> > annoying problem.
> >
> > Thanks,
> > Chuck Trites
> > >[log in to unmask]
> > >Trites Consulting, Inc.
> > >181 Hillcrest Drive
> > >Laconia, NH 03246
> > >Phone: (603) 219-1500
> >
> > * To join/leave the list, search archives, change list
> settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
> 
> * To join/leave the list, search archives, change list
> settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> 
> CAUTION: This message may contain privileged and
> confidential information intended only for the use of the
> addressee named above. If you are not the intended recipient
> of this message you are hereby notified that any use,
> dissemination, distribution or reproduction of this message
> is prohibited. If you have received this message in error
> please notify RYCO Hydraulics Pty. Ltd. immediately. Any
> views expressed in this message are those of the individual
> sender and may not necessarily reflect the views of RYCO
> Hydraulics Pty. Ltd.
> 
> * To join/leave the list, search archives, change list
> settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2