Hi Barry,
We are of course, on a 7.05.? system you have been so nicely supplying us patches with...
Plain JCL:
/SYS/PUB%>PRINT PTEST.JOB
!JOB PTEST,MANAGER.SYS;OUTCLASS=,1
!PAUSE 15
!EOJ
During stream, (Breakjob, a minute wait, and a Resumejob done in a different window.):
:JOB PTEST,MANAGER.SYS,PUB.
Priority = DS; Inpri = 8; Time = UNLIMITED seconds.
Job number = #j12189.
WED, APR 2, 2014, 5:22 PM.
HP3000 Release: C.75.00 User Version: C.75.05
MPE/iX HP31900 C.45.05 Copyright Hewlett-Packard 1987.
All rights reserved.
STREAMED BY TRACY,MANAGER.SYS (#S9882) ON LDEV# 82
STREAM DATE: WED, APR 2, 2014, 5:22 PM
[WELCOME SNIPPED]
:COMMENT STREAM FILE PTEST.JOB.SYS
:COMMENT STREAMED BY TRACY,MANAGER.SYS,PUB ON LDEV 82
:COMMENT RUNNING PROGRAM MAIN.PUB.VESOFT
:COMMENT ON WED, APR 02, 2014, 5:22 PM
:PAUSE 15
^
Number of pause seconds is out of range. (CIERR 9030)
REMAINDER OF JOB FLUSHED.
CPU sec. = 1. elapsed min. = 1. WED, APR 2, 2014, 5:23 PM.
Bottom of same job with CONTINUE statement.
Error is the same, but no job flush and goes to EOJ.
:COMMENT STREAM FILE PTEST.JOB.SYS
:COMMENT STREAMED BY TRACY,MANAGER.SYS,PUB ON LDEV 82
:COMMENT RUNNING PROGRAM MAIN.PUB.VESOFT
:COMMENT ON WED, APR 02, 2014, 5:29 PM
:CONTINUE
:PAUSE 15
^
Number of pause seconds is out of range. (CIERR 9030)
:EOJ
CPU sec. = 1. elapsed min. = 1. WED, APR 2, 2014, 5:30 PM.
Tracy Johnson
Office (757) 766-4318
[log in to unmask]
> -----Original Message-----
> From: Barry Lake [mailto:[log in to unmask]]
> Sent: Wednesday, April 02, 2014 12:56 PM
> To: Johnson, Tracy
> Cc: [log in to unmask]
> Subject: Re: Always Put CONTINUE Statements Before PAUSE Statements
>
>
> Tracy,
>
> What version of MPE is on the system where you see this happening?
>
> I can't duplicate the problem on a 7.5.3 system using your instructions:
>
>
> Sauron: stream
> >!job pause60, manager.sys
> >!pause 60
> >!eoj
> #J23
> >:
> Sauron: breakjob #j23
> Sauron: showjob #j23
>
> JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
>
> #J23 SUSP 10S LP WED 9:43A PAUSE60,MANAGER.SYS
>
> JOBFENCE= 7; JLIMIT= 8; SLIMIT= 16
>
> Sauron: pause 70
> Sauron: resumejob #j23
> Sauron: stj 23
>
>
> :JOB PAUSE60,MANAGER.SYS,PUB.
> Priority = DS; Inpri = 8; Time = UNLIMITED seconds.
> Job number = #j23.
> WED, APR 2, 2014, 9:43 AM.
> HP3000 Release: C.75.00 User Version: C.75.03
> MPE/iX HP31900 C.45.05 Copyright Hewlett-Packard 1987.
> All rights reserved.
> STREAMED BY BARRY,MANAGER.SYS (#S3) ON LDEV# 4
> STREAM DATE: WED, APR 2, 2014, 9:43 AM
>
> :pause 60
> :eoj
> CPU sec. = 1. elapsed min. = 3. WED, APR 2, 2014, 9:46 AM.
>
> Sauron:
>
>
> Regards,
> Barry Lake
> Allegro Consultants, Inc.
>
>
>
> On 4/2/14 7:31 AM, Johnson, Tracy wrote:
> > I nearly always put a CONTINUE statement before a PAUSE in any job.
> >Over the years I have discovered that sometimes the CPU waits "longer"
> >than the specified pause and fails with an error. (Or you can
> >duplicate this by doing a SUSPENDJOB on a job in the middle of a PAUSE
> >then do a RESUMEJOB after the specified time.)
> >
> > :PAUSE 5
> > ^
> > Number of pause seconds is out of range. (CIERR 9030) REMAINDER OF
> JOB
> > FLUSHED.
> >
> > A mere CONTINUE statement would have prevented this.
> >
> > I brought this up for general reading because I found it in generated
> >JCL, I had it recompied with embedded CONTINUE statements in the right
> places.
> >
> >
> > Tracy Johnson
> > Business Analyst
> > Measurement Specialties, Inc.
> > Office (757) 766-4318
> > Cell (757) 755-6470
> > [log in to unmask]<mailto:[log in to unmask]>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
