> On Sep 16, Graeme Rollinson wrote:
 >
 > I'm looking for someone who may have experienced this fault (especially if
 > on a 959 KS/200) and could suggest possible solutions.
 >
 > Since installing a 959 KS/200 a few weeks ago, I've experienced intermittent
 > system crashes with FLT B800.  The HP Response Centre says that B800 points
 > to a operating system problem but my 'gut feeling' is that it is a hardware
 > problem.  System DUMPS have not helped pin-point the problem.
 >
 [snip]
 >
 > Hardware configuration is:
 >
 > 959 KS200 with 512 Mbytes memory, DDS2 and CD-ROM installed on single ended
 > SCSI internal, and 4 x 4Gbyte disks installed internal on fast wide.
 > Installed in an A3312A expansion box is a second DDS2 connected to the
 > single ended SCSI, and 2 x 2Gbyte disks connected fast wide.
 >
 
 Hi Graeme !
 We had almost the same problem with a similar configuration:
 
 A 959KS/200 with 512MB, various F&W SCSI and FL-Disks.
 Our maschine crashed from time to time when running Netware/iX,
 the emulation for Novell's Netware for the 3000 (I know, you should never force
 a 3000 to behave like these PC-boxes...).
 Same result: "DEAD B800".
 According to HP-support the problem has to do with the streams/ix
 subsystem.
 
 There is a patch called "STRED99A" that should solve or even "reduce"
 the problem.
 Hope that helps you !
 
 Good luck !
 
 Martin Reissner.
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Martin Reissner                           E-Mail: [log in to unmask]
 IT-Manager
 ZEG Zentraleinkauf Holz + Kunststoff
 D-70432 Stuttgart
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~