Greg,
Bring it up to the ISL prompt and go to ODE then RUN MAPPER and see if you see both controllers and all the luns.
I'm assuming you've got two SP620 controllers in the NIKE and that they're both on HP28686A fwd cards in the 939. The firmware on the fwd cards must be 3728 or later, by the way, if you swap a new one in.
As this was working a short while ago, cables shouldn't be an issue, although a terminator can go bad at any time.
ODE/MAPPER should be the place to start, anyway.
jack
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Greg Terterian
Sent: Thursday, March 17, 2011 4:44 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] Help on System Failure
My Customer has Series 979 with Mod20 Disk Array.
Today they brought the system down for regular maintenance routine and when they tried to bring it up, it goes all the way mounting all the volumes on the disk array... and then goes to "Start Aggregate Recovery on MPEXL_SYSTEM_VOLUME_SET".. and then they get System abort 650 with subsystem 143.
It seems to me it is a disk problem, however, the disk array looks ok - no errors and no yellow lights. The scsi card seems working ok. I changed the memory card. I reset memory boards... no help..
Any help will be greatly appreciated.
It is going to be one of those nights...
Thanks
Dave
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Call us today about our Windows consulting for monthly support services, plus configurations and migrations.
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
