My 7980s got to where it wouldn't hold a configuration.  By any chance did
you check the scsi address in the configuration?  The only other thing I can
think of is a termination or cable problem.

Jim Knight
[log in to unmask]

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On Behalf Of
Jeff Kell
Sent: Wednesday, May 30, 2001 5:33 PM
To: [log in to unmask]
Subject: [HP3000-L] Strange SCSI tape message

Just happened to notice our SCSI tape drive (7980S) is no longer showing
up on the system.  I went back and checked console messages at boot
time and found:

LLIO Error - subsys: 213,  proc num: -49,  error_num: -28
Leaving -  System I/O configuration.
 ERROR  - LLIO device configuration error: -11
                      SYSTEM I/O AT BOOT TIME
The path 10/4/20.9.0 was configured but is not available.
ldev:    1          ST34371W  configured      available  10/4/24.6.0
ldev:    2          ST34371W  configured      available  10/4/24.5.0
ldev:    6           HPTCPJD  configured      available  NONE
ldev:    7          HPC1533A  configured      available  10/4/20.0.0
ldev:    8  Not added to configuration; LLIO device configuration error:
-11                       [...snip...]

(ldev 8 is the 7980)

Ring any bells?

Jeff Kell <[log in to unmask]>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *