Rick,
I had a similar problem when going from a serial 3si to a networked 5si.
 The report on the 5si would flow onto the next page.  To solve this I
disabled the perforation skip.

esc&l0L   - Disable  (esc & lowercase L zero uppercase L)

I'm not sure if this will help, mine was not a simple report, but a skid
flag with large printing and barcodes.

Good Luck
Steve Murphy
World Color - Salem IL


 ----------
From:  Rick Clark[SMTP:[log in to unmask]]
Sent:  Friday, March 07, 1997 11:38 AM
To:  HP3000-L
Subject:  LaserIIIsi landscape mode

Hi all..... I am stuck on a problem that at this point, the only solution
I
have is to purchase a new laser printer (and I'm sure they would buy that
one!),
so I'm hoping someone out there might have an idea.

Printing a report to a LaserJet printer 5si in landscape mode, the report
is
fine.
When printed to a Laserjet IIIsi, the pages creep up. The escape sequence
is
as follows:

\027&k2S \027&l0L \027&l1O \027&l51F

margins are  top=1
             bottom=5
             lft=5
             rhgt=155
             lines per page=51

Same report. Same sequences. Just different printers. Any suggestions?
Thanks in advance.

Rick Clark                   [log in to unmask]
P/A for WW&R
Cleveland, Ohio              Opinions are my own...

"You can't turn back the clock, but you can wind it up again." Bonnie
Pruden