We had a situation once in which a single terminal tied to a DTC had the ENTER key stuck, and was overloading the system with CR's.  Fixing the terminal caused the system to "unlock".  With this situation, even a reboot did no good, because as soon as communications were brought up, the terminal would flood the communications and CPU on the system.


  /~\/~\/~\/~\/~\/~\/~\/~\/~\/~\/~\
[]  Wyell Grunwald                                          []
[]  Geisinger Health System                        []
[]  Information Technology                           []
[]  Mail Code 30-33                                          []
[]  100 North Academy Avenue                   []
[]  Danville, PA  17822                                    []
[]                                                                            []
[]  Phone:  570-271-7342                                []
[]  Fax:  570-271-5162                                      []
[]  E-mail:  [log in to unmask]   []
[]  Web:  www.geisinger.org                          []
  \_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/\_/

>>> "Coombs, Darryl" <[log in to unmask]> Wednesday, November 15, 2000 11:45:02 AM >>>
Hi all, I have a problem with a 947LX and am hoping that someone here can
shed some light.  Users can enter "hello user.account" and their passwords
and will receive a few lines of the welcome message, but then the session
seems to hang, nothing else will happen.  This is happening to PCs running
Minisoft, terminals on a DTC and the console, the system is responding to
pings so it probably isn't a network problem. If anyone can shed some light
on this it would be greatly appreciated!

Thanks,
Darryl

Darryl Coombs, MCSE
IT Support Administrator
Air Atlantic
PO Box 13190 Station "A"
St. John's, Newfoundland, Canada   A1B 4A4
phone:  (709) 570-0682
fax:    (709) 570-0870
mailto:[log in to unmask]