The User Version does not get updated during either Patchix, Autopat,
Hpinstal, or Autoinst. The only time it is changed is during the Factory
Preload, or if you manually change it using Sysgen.

Matt


-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
Behalf Of Tracy Pierce
Sent: Tuesday, January 16, 2001 12:33
To: [log in to unmask]
Subject: Re: confirm 6.0 pp 2 please?


Autopat!  (This seemed to be the recommended method based on choosing
checklists etc.  I'll try Patch/iX for our first reactive, which will be ...
???

Tracy Pierce
415-923-2266

> -----Original Message-----
> From: Barry Durand [mailto:[log in to unmask]]
> Sent: Tuesday, January 16, 2001 9:11 AM
> To: [log in to unmask]
> Subject: Re: confirm 6.0 pp 2 please?
>
>
> Just out of curiosity, what did you use to install this patch?
> Patch\iX, Autopat,...?
>
> Thanks,
>
> Barry
>
>
> On 16 Jan 01, at 7:19, Tracy Pierce wrote:
>
> > Howdy.  I up'd our dev box to 6.0 pp2 on Sat, nearly
> painless, 5 hours.
> > Doing a SHOWME yields
> > USER: #S14,TRACY.VMS,KTP       (IN PROGRAM)
> > RELEASE: C.60.00   MPE/iX HP31900 C.16.01   USER VERSION: C.60.00
> > CURRENT: TUE, JAN 16, 2001,  7:19 AM
> > LOGON:   TUE, JAN 16, 2001,  5:50 AM
> > CPU SECONDS: 2         CONNECT MINUTES: 89
> > $STDIN LDEV: 5         $STDLIST LDEV: 5
> > I am YODA (HP3000 937SX).
> >
> > Shouldn't that say
> > RELEASE: C.60.00   MPE/iX HP31900 C.16.01   USER VERSION: C.60.02
> >
> > ????
> >
> >
> > K Tracy Pierce, Systems Programmer
> > Golden Gate Bridge, Hwy & Trnsp Dist
> > PO Box 9000, Presidio Station
> > San Francisco, CA  94129-0601
> > mailto:[log in to unmask]
> > 415-923-2266
> >
>
>
> ------------------------------------------
> Barry Durand           [log in to unmask]
> Allegro Consultants    408.252.2330
> http://www.allegro.com/people/durand/index.html
> Opinions are mine, not my employer's
> ------------------------------------------
>