According to the HP configuration guide, the Lanic must be in slot #1
of the expansion cage.  I know the lanic is very sensitive to the card
slot since I have one also.

Try to move it.

Rgds
Mel Rees
[log in to unmask]
On Tue, 1 Dec 1998 00:02:17 -0500 , Aaron Christopher Finney
<[log in to unmask]> wrote:

>I finally got the console to come up using the freeware emulator. I do get
>an error with the lanic card, but I'm hoping that it's just a no-media
>type of error. I did, however, connect a transceiver with a loop-back
>cable and got the same error. I see the led's flash on the transceiver for
>an instant, but nothing after that - totally dead.
>
>What follows is my terminal output, maybe one of you kind souls can offer
>some additional insight from it. If not, I'll wait until I get the HP-IB
>cables and get the drives connected before filling up your mailboxes
>again...
>
>
>Power on Self Test
>Memory Test passed
>Number of banks = 16
>Slot   1 Channel  1  - Terminal Interface Controller
>Slot   4 Channel  4  - Peripheral Interface Channel
>Slot  E1 Channel  9  - Terminal Interface Controller
>Slot  E3 Channel 11  - Terminal Interface Controller
>Slot  E5 Channel 13  - Local Area Network Interface Controller failure
>002E
>Cannot Auto-Warmstart because of I/O card failure
>
>3-REMOTE
>H for help->TE
>
>
>ROM Versions:1.2444  2.2444  3.2444  4.2444
>
>Selftest Menu:
>
>AL[l] [ count ]
>CH[an] [ count [ ,chan ] ]
>CP[u] [ count ]
>E[xit]
>I[omap] [ count ]
>M[emory] [ count ]
>PON [ count ]
>
>3-REMOTE
>Test ->AL
>
> TOC RAM
>Addr Data
>0008 0000
>0009 0016
>000A 0022
>000B 0020
>000C 0025
>000D 000D
>000E 00FF
>000F 00FF
>Observe LED display cycle 0-F
>CPU test passed
>Memory Test passed
>Cannot test console TIC in REMOTE or LOCAL(from REMOTE)
>Slot   4 Channel  4  - Peripheral Interface Channel
>Slot  E1 Channel  9  - Terminal Interface Controller
>Slot  E3 Channel 11  - Terminal Interface Controller
>Slot  E5 Channel 13  - Local Area Network Interface Controller failure
>002E
>Test Failed
>                    System I/O Configuration
>----------------------------------------------------------------------
>Number of banks = 16
>Load:       Channel  4 Device 5
>Start/Dump: Channel  4 Device 0
>----------------------------------------------------------------------
>Slot   1 Channel  1  ID=4  - Terminal Interface Controller
>----------------------------------------------------------------------
>Slot   4 Channel  4  ID=2  - Peripheral Interface Channel
>  Device 4 ID=4003  - Intelligent Network Processor
>----------------------------------------------------------------------
>Slot  E1 Channel  9  ID=4  - Terminal Interface Controller
>----------------------------------------------------------------------
>Slot  E3 Channel 11  ID=4  - Terminal Interface Controller
>----------------------------------------------------------------------
>Slot  E5 Channel 13  ID=8  - Local Area Network Interface Controller
>----------------------------------------------------------------------
>
>3-REMOTE
>Test ->
>
>
>Thanks again, everyone.
>
>Aaron
>
>
>
>Aaron C. Finney         Systems Administrator           WFI Incorporated
>------------------------------------------------------------------------
>"UNIX is an exponential algorithm with a seductively small constant."
>