Thanks. the escape E took care of the problem. Printed great!
        Tom Hula

|-----Original Message-----
|From: Ed Stouder [mailto:[log in to unmask]]
|Sent: Friday, March 01, 2002 1:46 PM
|To: Tom Hula
|Subject: Re: [HP3000-L] P405 and Network Printing
|
|
|Tom,
|
|One thing that I believe you need is a setup file that just has an "esc E"
|in it. The reason you are getting compressed print is that even if
|you don't
|print the banner pages, the network printer driver is sending the codes to
|turn on compression codes, for the banner pages.
|
|The setup file will reset this.
|
|Ed Stouder
|Beechglen Development Inc.
|
|----- Original Message -----
|From: "Tom Hula" <[log in to unmask]>
|To: <[log in to unmask]>
|Sent: Friday, March 01, 2002 12:57 PM
|Subject: [HP3000-L] P405 and Network Printing
|
|
|> I looked in the archives on this subject, but the only thing I found out
|for
|> sure
|> is that some people are doing this successfully and some people have had
|> problems.
|>
|> I set up the P405 on a JetDirect 300x box, with a Windows driver
|> of Generic/Text. On the 3000, have it set up with pjl_supported = FALSE
|> and jam_recovery = FALSE and no setup file.
|>
|> I sent a printout that normally prints there via the serial connection
|with
|> all the same configurations set up on the P405, with HP emulation set.
|>
|> What I got was very tiny print. All the information is there, but it
|> obviously
|> doesn't line up with the form at all.
|>
|> So for those who are using P405 printers, what am I missing? Should
|> there be a setup file, and if so, what should be in it? TIA
|> Tom Hula
|> Victor S. Barnes Company
|> (616)361-7351  x173
|> (616)361-6633  fax
|>
|> * To join/leave the list, search archives, change list settings, *
|> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *