Sorry, unsupported machine.

BT


Tracy Johnson
MSI Schaevitz Sensors 

> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
> Behalf Of James Hofmeister
> Sent: Tuesday, February 22, 2005 1:54 PM
> To: [log in to unmask]
> Subject: [HP3000-L] Name This Error
> 
> 
> Hey Tracy,
> 
> >> Can anyone name this error and the configuration fix?
> 
> ** NETXPORT TCP : PACKET DISCARD; Checksum error
> - Loc: 12002; Class: 3; Parm= $879B2000; PortID: $87F5FCA0
> 
> This is an indication of a link hardware problem.  TCP 
> Checksum is decoded
> and does not match the checksum on the inbound TCP packet.  
> Data corruption
> has been identified and the packet is discarded.
> 
> Note:  The CRC at the link level (seen with linkcontrol 
> @;status=all) is not
> sufficient to catch some cases of data corruption, depending 
> on where the
> corruption was introduced.
> 
> A configuration fix?   <sarcasm bit enabled> Well, ewwwww... 
> I guess you
> could turn of TCP Checksum if you really did not mind data corruption.
> <sarcasm bit disabled>
> 
> If this problem persists, it probably would be a good idea to 
> give those
> folks at the Response Center who troubleshoot this for a 
> living a call.
> 
> Regards,
> 
> James Hofmeister
> Email: <first>.<last>@hp.com
> Hewlett Packard - Global Solutions Engineering (WTEC)
> P.S. My Ideals are my own, not necessarily my employers.
> 
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> 

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *