John,

Keep in mind that when using data_intray = N, N does NOT mean a tray number.
Don't ask me why it's done so but it is.  Instead, the number showing there
is number to include in escape sequence to be sent to printer for paper
source selection.

For example, for a Laserjet 2200, which is, quite similar to a 2300, as far
as I remember, manual says:

Paper Source:  [esc]&l#H  0 = prints or ejects current page
                          1 = Tray 2
                          2 = manual feed, paper
                          3 = manual feed, envelope
                          4 = Tray 1
                          5 = Tray 3
                          7 = auto select

Hope this will help !

=========================================
Denis  (Remove "removeit." from email address)
=========================================
"John Pitman" <[log in to unmask]> wrote in message
news:WQadnVCw3MAlmhiiU-KYgA@fidnet.com...
> and I thought I had this licked.....
> With DATA_INTRAY=1 for top tray, DATA_INTRAY=4 for bottom, it works
> beatifully on a Xerox printer.
> I try to do it to a hp2300N, and it asks for intervention when I select
> bottom tray - prompts like 'manual feed tray 1', press continue, then 'use
> tray 3' - continue, prints from bottom tray.
>
> Anybody BTDT please?
>
> tia,
> John
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *