 
| Subject: | |
| From: | |
| Reply To: | [log in to unmask][log in to unmask], 6 Aug 2002 14:46:43 -0500501_- Mike, Thanks for the suggestion. Have you done timings on this recommendation? And although the 989/650 is a powerful beast, we do tend to use it, or we wouldn't have purchased it. The intent of the compress=LOW coupled with the INTER option, is to keep the data flowing down the SCSI bus while not wasting system resources. I guess the right answer depends on the effectiveness of the compression algorithm in the DLT drive verses the MPE compress=high algorithm. [...]35_6Aug200214:46: [log in to unmask] |
| Date: | Thu, 1 Aug 2002 17:12:07 -0400 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
Alan,
In addition to removing the primary boot drive (Ldev) on path 52.6, did you
make the drive on path 52.5 the new LDev 1 in sysgen?
Thanx,
Jon
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
Behalf Of [log in to unmask]
Sent: Thursday, August 01, 2002 4:32 PM
To: [log in to unmask]
Subject: [HP3000-L] Primary boot disk has died... New Install?
Hi,
I have a HP 918 which has 3 disks:
56/52.4
56/52.5
56/52.6
the primary boot disk 52.6 has died so I have
removed it. I have backups so a new install
of MPE/iX 6.0 is ok... so I load up the 6.0
SLT DDS tape and boot from that and then
ISL> install
primary boot disk was changed to 52.5 the
MPE/iX loading message starts and then
Beginning INSTALL...
then nothing... for hours...
the disks show up fine with MAPPER.
AUTO reboot and search is off.
the DDS3 tape is 56/52.0
Any help please.
Alan
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|
