Yup.

We rebooted and things are fine now.

On 7/12/10, joseph dolliver <[log in to unmask]> wrote:
> Have you looked at the settings behind the screens , like baud rate and so
> no...
>
> On Thu, Jul 8, 2010 at 9:38 AM, Mark Landin <[log in to unmask]> wrote:
>
>> Hey folks.
>>
>> We have a 700/96 connected to our 939KS/020 as the console. This morning,
>> we
>> can't get a login prompt on it. We can Ctrl-B just fine, we see console
>> messages, and showdev looks normal. We checked the terminal and datacomm
>> config ... all OK. We even hooked up another known good 700/96, and get
>> the
>> same behavior.
>>
>> A bit of recent history ... we recently had an overtemp condition in our
>> machine room on Tuesday, and the system shut down. The Model 20 we have
>> connected wouldn't come back up until we replaced one of the (supposedly
>> redundant?) SP's, and then the machine seemed to boot fine. It ran without
>> incident the rest of Tuesday and all day yesterday.
>>
>> So, any ideas? I vaguely remember reading about problems if the console
>> buffer filled up, but don't recall any details, especially how to clear
>> that
>> condition if, in fact, it exists.
>>
>> --
>> "He's old enough to know what's right and young enough not to choose it.
>> He's strong enough to win the world and weak enough to lose it." - Neal
>> Peart
>>
>> * To join/leave the list, search archives, change list settings, *
>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>
>

-- 
Sent from my mobile device

"He's old enough to know what's right and young enough not to choose
it. He's strong enough to win the world and weak enough to lose it." -
Neal Peart

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *