HP3000-L Archives

February 2006, Week 1

HP3000-L@RAVEN.UTC.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Skeet, Nigel" <[log in to unmask]>
Reply To:
Skeet, Nigel
Date:
Mon, 6 Feb 2006 11:22:32 +0100
Content-Type:
text/plain
Parts/Attachments:
text/plain (183 lines)
Hi Dan,

What is LDEV 132 ? Is it some sort of DTC printer or Pseudo device ? If
a DTS device what profile is it using ?

Regards,

Nige...

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Dan Barnes
Sent: 03 February 2006 16:43
To: [log in to unmask]
Subject: Re: [HP3000-L] DTCCNTRL Problem

Hmmm, even after a reboot, the site is still getting the following
message at startup:

print logdcc.pub.sys
==========  FRI, FEB  3, 2006,  8:55 AM
DCC STARTUP - ENTER - version C0500001 compiled 000612  
DCC ERROR   -120-3, (HLIO status  0004006F, ldev  132). (DCCERR=6)
DCC STARTUP - ERROR


Any other ideas ?!?

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Dan Barnes
Sent: Friday, February 03, 2006 8:32 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] DTCCNTRL Problem

Well, I was able to get the validate to go thru cleanly by not choosing
to apply the changes now, so managed to save my co-workers input work
from yesterday.

Now we are working on getting a reboot done to see if things will clear
up.....

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Gilles Schipper
Sent: Thursday, February 02, 2006 5:18 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] DTCCNTRL Problem

If that's the case, you need to back out  the printer definition or fix
it such that validation succeeds.

You will not be able to successfully restart the DCC subsystem absent a
valid DTS subsystem subset of your nmconfig file.

You may be able to recover an earlier version NMCONFIX.PUB.SYS. Try
replacing NMCONFIG with that, revalidate and reboot.

If that does not do it, you will need to retrieve NMCONFIG.PUB.SYS from
backup, revalidate, and reboot.



At 06:11 PM 2006-02-02, Dan Barnes wrote:

>Another one of our admins had gone into nmmgr to add a printer
definition.
>When she went to Validate this, the error was initially encountered.
>Subsequent attempts to try to get it to either restart, or shutdown,
and
>then restart have all failed with the described message.
>
>-----Original Message-----
>From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf
>Of Catherine Litten
>Sent: Thursday, February 02, 2006 4:57 PM
>To: [log in to unmask]
>Subject: Re: [HP3000-L] DTCCNTRL Problem
>
>What caused to to restart the DTC to begin with.  If you had some sort
of
>system boggle or change then changed it again without a reboot in
between
>thats when I find I get these kind of messages.
>
>Hope this helps,
>Cat Litten
>x2911
>CONFIDENTIALITY NOTICE
>This transmission and any attachments are confidential and intended
solely
>for the use of the individual or entity to which they are addressed. It
may
>also be legally privileged and protected under any and all local, state
and
>federal laws. If you are not the addressee, you may not copy, forward,
>disclose or use any part of it. If you have received this message in
error,
>please delete it and all copies from your system and notify the sender
>immediately by return E-mail, fax or phone.
>Electronic communications cannot be guaranteed to be timely, secure,
error
>or virus-free. The sender does not accept liability for any errors or
>omissions or differences between the original and the transmission copy
>
>-----Original Message-----
>From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
>Behalf Of Dan Barnes
>Sent: Thursday, February 02, 2006 2:15 PM
>To: [log in to unmask]
>Subject: DTCCNTRL Problem
>
>
>Hi Gang,
>
>I have tried the following, but still get the same error.  Are there
any
>other options ?
>
>:DTCCNTRL FUNC=RESTART
>
>DTCCNTRL Version C.02.00.004 (C) Hewlett-Packard Co. 1990
>
>CTL ERROR:  DCC encountered error during previous DTS startup.
>
>END OF PROGRAM
>
>Thanks!
>Dan
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
>__________ NOD32 1.1391 (20060201) Information __________
>
>This message was checked by NOD32 antivirus system.
>http://www.eset.com
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

------------------------------------------------------------------------
----
---------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651   Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000     Fax: 905.889.3001
email:  [log in to unmask]  web: http://www.gsainc.com
------------------------------------------------------------------------
----
---------------------

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


__________ NOD32 1.1391 (20060201) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


__________ NOD32 1.1392 (20060202) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2