Jim said....
>
> But that's only on Slot 0.  On Slot 1, I get no prompt.  Pressing
> return just results in the terminal's cursor doing a CR/LF and
> going to the next line.  I saw this before when I misconfigured the
> terminal profile as modem instead of direct connect, so I double-
> checked the profiles and they are correct.  I tried reseating the
> Slot 1 card from the back of the unit, but to no avail.  The vendor
> is going to send me a new Slot 1 card, but what say you?
>
> Anyway, 50% isn't so bad, especially since I only need 6 ports or
> so right now.
>
> Jim Phillips                            Manager of Information Systems
> Voice: (915) 860-9933                   Therm-O-Link of Texas, Inc.
>   Fax: (915) 860-9936                   1295 Henry Brennan
> Email: [log in to unmask]       El Paso, Texas   79936

I just read your message that you got it all working, but I wanted to
comment on another potential problem when the cursor does a CR/LF.

We have seen this when we have had less than good communication between
the DTC and the HP.  Normally this happens over an ISDN line with some
so-so bridges.

Glad to hear that the next step in the saga is complete.  I can't wait for
the next installment. :->

/alan
[log in to unmask]