The last company I worked for ran across very similar problems and
they seemed to be fixed (I left just as this was happening) by
setting the ports on the switches to either 10 or 100 Mbps.  The
autosensing seemed to be part of the problem.

HTH,

Barry


On 18 Feb 00, at 18:32, [log in to unmask] wrote:

> The HP3000s have 10Mbps cards, some of the PCs have 10Mbps and some
> others 10/100 Mbps cards. The switches have autosensing ports. When
> the Reflections lose their connections the following is the Error
> message
>
>     NS/3000 NetIPC Error IN VT Job:#S5920; PIN: 118; INFO: 1 Error: 42
>
> Any idea what this is?
>
> Thanks
> AL
>
> Al < [log in to unmask] <mailto:[log in to unmask]> >
> wrote in message news:[log in to unmask]
> <news:[log in to unmask]> ...
>
> Just got rid of all our 10Mbps Hubs and put in 5 Cisco Catayst
> Switches. Ever since the switches went in have  problems with
> Reflections Terminal Emulatiors and users loosing their connections to
> the HP3000s from their PCs Any idea what could be causing the
> problems?
>
> Thanks
> Al
>


------------------------------------------
Barry Durand           [log in to unmask]
Allegro Consultants    408.252.2330
Opinions are mine, not my employer's
------------------------------------------