If you are using the NIC that comes with the LQ500, you may have got a
flaky one.
If it is a bad one, it will reset at the slightest hiccup.
In such a case, better to switch to the parallel port and use an
external JetDirect box.
If you go this route you'll find when you take off the printer cover
they just hooked up a Centronix female plug onto a little NIC. Just
unplug the Centronix cable and thread it through the alternate hole.
Tracy Johnson
Business Analyst
Measurement Specialties, Inc.
1000 Lucas Way
Hampton, VA 23666
Office 1-757-766-4318
[log in to unmask]
www.meas-spec.com
> -----Original Message-----
> From: HP-3000 Systems Discussion
> [mailto:[log in to unmask]] On Behalf Of Jim Alexander
> Sent: Friday, May 29, 2009 10:48 AM
> To: [log in to unmask]
> Subject: [HP3000-L] LPQ500 line printer weirdness
>
> Me again .. More network switching fun.
>
> I re-IPed the two LineJet printers we have without issue, then I
> plugged them into the CVS switch and it has decided to server
> up new IP
> addresses. They are on the same segment, but just different
> last octet
> values.
>
> I have checked the printers, but using Telnet to get to the Ethernet
> Interface card and it does report that both BOOTP and RARP
> (reverse ARP)
> are active.
>
> I don't find a way of turning this off. You might notice from the
> listing that I am adding below, the OPTIONS show that while BOOTP and
> RARP are selected, the DHCP is not selected. Still I find
> nothing in
> the commands that tell me how I might turn this off.
>
> Here is a display of the TCP/IP output from the Telnet session:
>
> *** tcpip (TCP/IP network)
> -- NETWORK INTERFACES
> ---------------------------------------------------------
> IFNUM IP ADDRESS NETMASK HDW ADDRESS OPTIONS
> FRAMETYPES
> 1 10.195.226.137 255.255.254.0 0:80:72:9:d7:65
> br e8
>
> OPTIONS: FRAMETYPES:
> b=bootp r=rarp d=dhcp e=ethernet2 8=802.2snap
>
> -- TCP/IP ROUTING TABLE
> -------------------------------------------------------
> NETWORK NETMASK GATEWAY IFNUM
> METRIC USAGE
> default 255.255.254.0 10.195.226.1 1 1 0
>
> -- PROXY ARP TABLE
> ------------------------------------------------------------
> IP ADDRESS NETMASK
>
> -- OPTIONS
> --------------------------------------------------------------------
> tcp rxwin: 2 MSS pkts
> tcp options: keepalive (3 MINUTES)
> ip forwarding: disabled
>
> -- TCP ACCESS TABLE
> -----------------------------------------------------------
> NETWORK NETMASK LEVEL
>
>
> *** arp (ARP table contents)
> INTERNET ETHERNET FRAMETYPE USE TTL COUNTER
> 10.195.226.1 0:24:14:ac:5e:0 ethernet2 1 600 2
> 10.195.226.26 0:60:b0:56:66:77 ethernet2 1 600 312
>
>
>
>
> --
> Jim Alexander Longs Drug Stores
> Sr. Systems Programmer 925-210-6901
> The opinions expressed are Mine and not Longs Drugs
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|