I have a few suggestions:

1) How about turning off the ECHO with SET ECHO=OFF before you send
the command?  I think I'll try this on out... It works:
        transmit "set echo=off^M"
        transmit "showjob^m"
The commands still show in the listredo, but you could send commands
to clear that also
2) You may need to use the PJL-SUPPORTED parameter in your NPCONFIG
file.  The printers do not seem to support PJL commands (as most newer
HP printers do) so you need to turn it off.  MPE assumes your printers
can speak PJL commands.

Rgds
Mel Rees
CMT, INc

On Tue, 12 Sep 2000 17:34:57 GMT, [log in to unmask] (John Dass)
wrote:

>
>Hello,
>
>I have 2 questions :
>
>1. Hiding commands from being displayed on Reflection screen.
>
>I am using Reflection to connect to the HP3K machine running MPE and I
>have some commands such as dscopy that needs the password to be
>included into the command-line making it visible to the everyone.
>Therefore, I was wondering if there is a way to run a command on the
>host without displaying the command on the terminal, only the output
>is displayed. Much like the way the RUN PCLINK2.PUB. something for
>Reflection File Transfer actually runs the command on the host, but
>the actual command is not echoed on the screen, but if you do a
>listredo, you can see that command in the history.
>
>2. PCL Reset printout (a little off-topic)
>
>We are sending PCL forms into the HP printers memory and all along it
>was working fine. We used the command SPOOLF with the PRINT option to
>send a PCL encoded FORM format file to the HP Laser printer and it
>just goes into the Printer's memory. Lately however, we have been
>experiencing problems with a newer HP printers. They keep printing a
>page for each form we spool to the printer. The printout is as
>follows:
>
>     @PJL RESET
>                    @PJL EOJ NAME = "User: root; Job:psgbp130-2065"
>
>We dunno why this is happening with the new printers. Have anyone come
>accross this problem? The PCL FORM format file was created with the
>application called JETFORM. Anyway, this was not a problem before, but
>only now. Any printer + MPE gurus got some idea on this, please let me
>know any pointers would be greatly appreciated.
>
>Thank you very much for any help in these 2 issues.
>
>Best regards,
>John
>