Jeff,

Last night I looked at the NMMGR config on our obsolete 957, and noticed
some differences, and got to think about them on the way home.....
This morning I had a fair idea of where to go, and lo there was a mail from
Doug Werth confirming my idea - DTSLINK should be type lan, not BT100, and
to delete and re-add the configs.
Did this, and couldnt find the screen giving me 'autonegotiate y/n ' option,
and peg card to 10mb/s. Ignored this , validated, and it works fine!

Thanks for everybody's suggestions.

jp
----- Original Message -----
From: "Jeff Kell" <[log in to unmask]>
To: "John Pitman" <[log in to unmask]>
Sent: Thursday, March 20, 2003 6:46 PM
Subject: Re: [HP3000-L] Fw: nextxporterr 4204 - device open


> The manual isn't very informative and I'm running out of ideas:
>
> MESSAGE: linkname DEVICE STARTUP FAILED.4204
>
> CAUSE:
>
>     1. The configured device does not exist on the system.
>
>     2. The link connection is bad due to faulty hardware.
>
>     3. An internal error has occurred during device startup.
>
> ACTION:
>
>     1. Consult the SHERLOCK diagnostics to determine the cause of the
> link error. If no link error is indicated, see Submitting an SR, of this
> manual.
>
>     2. Consult the SHERLOCK diagnostics to determine the cause of the
> link error. If no link error is indicated, see Submitting an SR, of this
> manual.
>
>     3. Consult the SHERLOCK diagnostics to determine the cause of the
> link error. If no link error is indicated, see Submitting an SR, of this
> manual.
>
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *