I have seen errors reported with Sysdiag, sysmap.
I thought the same thing, bad boards.
But it turns out the Sysdiag was wrong.
Go with the Sysinfo.
Craig M. Lalley
Systems Performance Specialist
Lund Performance Solutions
Phone (630) 717-8534 | Email [log in to unmask]
Fax (541) 812-7611 | Web http://www.lund.com/
_________________________________________
NOTICE: This communication may contain privileged or other confidential
information. If you are not the intended recipient or believe that you
may have received this communication in error, please reply to the
sender indicating that fact and delete the copy you received. In
addition, you should not print, copy, retransmit, disseminate, or
otherwise use the information. Thank you
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of John Lee
Sent: Thursday, May 09, 2002 1:58 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] How much memory is really there?
One of the memory boards is probably bad. The system sees it but it's
not
working.
John Lee
Vaske Computer Solutions
At 11:42 AM 5/9/02 -0700, Paul H. Christidis wrote:
>Folks,
>
>We are removing some 'excess' memory from our 967/SX to be used
elsewhere
>and are trying to explain a discrepancy that is being reported by
different
>utilities (sysinfo.prvxl.telesup AND sysmap (within SysDiag)). See
below.
>
>Can anyone offer an explanation on the apparent discrepancy?
>Do we have 1/4 GB as reported by SYSINFO or 1/2 GB as reported by
SYSMAP ?
>
>Regards
>Paul Christidis
>
>
>
><JR%SYS>:sysinfo.prvxl.telesup
>-----------------------------------------------------------------------
---
>SysInfo_XL (A.04.00) cm2 10.98 MPE XL - HP3000 System Support
Tool
>THU, MAY 9, 2002, 1:23 PM Copyright Hewlett Packard Co.
1989
>SysInfo_XL is designed for use by Hewlett Packard Support personnel
only.
> HP IS NOT LIABLE FOR DAMAGES RESULTING FROM UNAUTHORIZED USE
>-----------------------------------------------------------------------
---
>
>System Information as of THU, MAY 9, 2002, 1:23 PM
>
>MPEXL HP31900C.16.01 OS: C.60.00 User Version: C.60.00
>CPU Model: SERIES 967SX Memory : 256 Mb
>CPU ID : 4522xxxxx ($1AF4xxxx) Single Processor Limited to 64
Users
>
>)exit
><JR%SYS>:sysdiag
>
>*****************************************************************
>****** ******
>****** ONLINE DIAGNOSTIC SYSTEM ******
>****** ******
>****** (C) Copyright Hewlett Packard Co. ******
>****** 1987, 1989, 1990, 1992, 1994 ******
>****** All Rights Reserved ******
>****** ******
>****** DUI Version A.02.25 ******
>****** Diagnostic Monitor Version A.02.31 ******
>****** ******
>*****************************************************************
>
> Type "HELP" for assistance.
>
>DUI >sysmap
>*****************************************************************
>****** ******
>****** SYSTEM MAP ******
>****** ******
>****** (C) Copyright Hewlett Packard Co. ******
>****** 1987 - 1998 ******
>****** All Rights Reserved ******
>****** ******
>****** HP shall not be liable for any damages resulting ******
>****** from the use of this program. ******
>****** ******
>****** Version A.03.46 ******
>****** ******
>*****************************************************************
>
>Welcome, Today is THU, MAY 9, 2002 at 1:24 PM
>
>SYSMAP INITIALIZATION IN PROGRESS. PLEASE STAND BY.
>
>ENTER MAP >memmap
> SYSTEM MEMORY MAP
>
>-----------------------------------------------------------------------
----
---
>MEMORY CONTROLLER - HARDWARE MODEL NUMBER --------> $14
> HARDWARE REVISION NUMBER -----> $0
> HARDWARE PHYSICAL ADDRESS ----> $0
>
> SLOT MEMORY
> NUMBER SIMM SIZE STATUS
> ====== ==== ========== ========
> 0 A 256 MBYTES ENABLED
> B 256 MBYTES ENABLED
>
>-----------------------------------------------------------------------
----
---
>
> SPA MAPPING
>
> SLOT SPA MODULE MODULE
> NUMBER TYPE NUMBER ADDRESS RANGE
> ====== ========== ====== =========================
> 0 A/B DUAL 0 $0000000000 - $000FFFFFFF
> 1 $0000000590 - $001000058F
>
>-----------------------------------------------------------------------
----
---
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
