John, that second tape you mention is commonly called the CSLT (Custom SLT)
made with SYSGEN.
***************************************************************
CDR Paul Edwards USNR Ret. HP 3000/9000 Certified Consultant
Paul Edwards & Associates Phone: (972) 242-6660
1506 Estates Way Fax : (972) 446-9022
Carrollton TX 75006 Cel : (214) 384-8728
Email: [log in to unmask] Web : www.peassoc.com
***************************************************************
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
Behalf Of John Lee
Sent: Thursday, September 01, 2005 3:44 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Copying SLT, FOS and SUBSYS tapes
We're talking about 2 different SLT tapes here. You're referring to the
original SLT for a bare bones system. I'm referring to the SLT tape you
should make after you've built the system...that's the most important one
for recovery purposes, and it does not come from HP...you have to cut it
and recut it whenever you change your config.
John Lee
At 04:28 PM 9/1/05 -0400, James B. Byrne wrote:
>On 1 Sep 2005 at 15:21, John Lee wrote:
>
> > SLT tapes don't come from HP.
>
>That is odd, since how else could one do a clean install to a bare
>bones HP3000 without a factory SLT to boot from? The other
>difficulty I have with your statement is that I nonetheless possess
>several versions of HP produced factory SLTs for MPE/iX from ~4.5
>up to 7.0, the latter of which I have in front of me as I write
>this.
>
>Regards,
>Jim
>
>--
> *** e-mail is not a secure channel ***
>mailto:byrnejb.<token>@harte-lyne.ca
>James B. Byrne Harte & Lyne Limited
>vox: +1 905 561 1241 9 Brockley Drive
>fax: +1 905 561 0757 Hamilton, Ontario
><token> = hal Canada L8E 3C3
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
