Subject: | |
From: | |
Reply To: | |
Date: | Fri, 16 Jun 2006 09:56:09 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hope this helps.
http://docs.hp.com/cgi-bin/doc3k/B3692390021.13753/17
32 MESSAGE CONFIGURED GATEWAYS (n) MUST BE <= IPU MAX GATES
(m).
CAUSE The number of gateways configured for the
specified NETXPORT.NI.NIname.INTERNET screen is
greater than the maximum value permitted.
ACTION Use the NMMGR utility to reduce the number of
gateways in NETXPORT.NI.NIname.INTERNET to be
equal to or less than the maximum value.
Validate the configuration again.
Regards,
Reid E. Baxter
Johan Harmsen
<johan.harmsen@HOLLAN To: [log in to unmask]
DHOUSE.COM> cc:
Sent by: HP-3000 Subject: [HP3000-L] Configure gateway in NMMGR
Systems Discussion
<[log in to unmask]
DU>
06/16/2006 02:32 AM
Please respond to
Johan Harmsen
Hello
When I try to configure a gateway in NMMGR on our MPE/iX 7.5 system I
get the following error when I try to validate my new configuration.
There are no other gateways configured so the CONFIGURED GATEWAYS (1)
value look OK to me, so the question how can I increase the IPU MAX
GATES value.
Searching for subsystem validation routine VALIDATENETXPOR
---> VALIDATION OF NETXPORT SUBSYSTEM STARTED <---
*** VALIDATE ERROR --> PATHNAME : NETXPORT.NI.LAN1.INTERNET
CONFIGURED GATEWAYS (1) MUST BE <= IPU MAX GATES (0). (VALERR 32)
---> VALIDATION OF NETXPORT SUBSYSTEM FINISHED <---
Any ideas will be greatly appreciated.
Best regards
Holland House B.V.
Johan Harmsen
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|