Hum...  The old EX Plus ?  What kind of cable do you use between EX Plus and
LJ2200 ?  I ***think*** there was a setting in JD EX+ to enable/disable
bi-directional printing...  Maybe you could look at it...

Hope this helps !

--
=========================================
Denis  (Remove "removeit." from email address)
=========================================
"SURFboard" <[log in to unmask]> wrote in message
news:3FCDA49D.255F886E@xsc.org...
> I connected the HP LaserJet 2200 to the external HP JetDirect EX Plus
> (J2591A) print server.  The HP printer wizzard installer detected the
> printer attached to the JetDirect EX Plus, however, it can't even do
> test print nor any printing.  Is there incompatibility with the
> JetDirect EX Plus and LaserJet 2200?
>
> I tried a borrowed JetDirect 300X with the same printer and it print
> okay but not with the EX Plus.
>
> I already did several reset to factory default (press test button for at
> least 15 seconds while powering on), I can telnet to the JetDirect EX
> Plus and also can view the settings using the Web JetAdmin but I can't
> make the LaserJet 2200 work with it.  Anyone?
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *