You need more than just the appropriate powerpatch.
You also need the software itself, which is not "standard".
Rather, for all non A-class and non N-class HPe3000's it's an add-on
and would be located on an "add-on" or "subsys" tape.
At 03:40 PM 2010-02-18, Michael wrote:
>I thought MPE 7.0 pp2 had all the necessary patches for the BT100
>to function properly, correct me if I am wrong.
>
>On a 9x9 (K-Box) running MPE 7.0 pp2:
>Installed the BT100 board
>Ran mapper found the bt100 to be at /10/4/16.
>
>NMMGR, modified both DTSLINK & NS type and path.
>
>Validate both NS and DTS, OK.
>
>REBOOT, with the following error:
>DCC ERROR 15-3 link error status FBFD032C LLIO PATH (DCCERR 19)
>DCC START ERROR
>
>So, what I am I missing?
>
>Any clues much appreciated.
>Mike.
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Tel: 416.702.7900
email: [log in to unmask] web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|