[introduction snipped]
 
> Does anyone have any information on how we could use the Telnet/iX
> card in our DTC 72MX that we happen to already have, or some other way
> to allow incoming telnet into the HP3000.  (There's already an X.25
> card in the DTC, but that shouldn't affect things, right??)
 
Although I'm not a HP guru, here is what you need:
 
- a PC with WfW 3.11 with a LAN card
- HP OpenView for Windows
- HP OpenView DTC Manager for Windows
 
OpenView will let configure your DTC72MX with all its cards you have.
This configuration will be downloaded to the DTC from PC when you
you power-on the DTC. OpenView enables you to manage the X.25 stuff
as well.
 
With MPE/iX 5.5, coming this summer/autumn, inbound telnet will be
included, although there will be a (noticeable ?) difference in
performance.
 
Roman
 
 =========================================================================
*  Roman Sallin                           Tel     +41 (0)31 9810666      *
*  SWS SoftWare Systems AG                Fax     +41 (0)31 9813263      *
*  Freiburgstr. 634                       E-Mail  [log in to unmask]    *
*  CH - 3172 Niederwangen                                                *
 =========================================================================