 
| Subject: | |
| From: | [log in to unmask][log in to unmask], 9 Aug 1996 13:39:30 CDT372_- On Fri, 9 Aug 96 14:19:03 EDT, Jim Keohane < [log in to unmask]> wrote: | We get reason error -712 subsystem 104 on a call to HPGETPROCPLABEL |to load MODULE B only if MODULE A was previously loaded. Can anyone point |us to or actually provide the meaning of these returned values. This is what I see when I look up that error on my MPE 5.0 system: [...]36_9Aug199613:39: [log in to unmask] |
| Reply To: | |
| Date: | Wed, 7 Aug 1996 14:23:53 +0800 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
To your questions:
1. SCSIDDS LDEV=<tapedrive number> SC=50 will bring you to the
external exerciser where you can do a HELP to see all the available
options. There is a RESET command which does a hard reset on the drive
2. To see the descriptions of the sections available, do
HELP SCSIDDS SC
3. The SYSDIAG utilities in 5.0 are protected by a HP ONLY password
(self-maintainer license).
Hope that helps!
yuhsin
-- my opinions do not reflect those of hp's response center
______________________________ Reply Separator _________________________________
Subject: How to reset DDS drive on 4.0 system
Author: Non-HP-HP3000-L ([log in to unmask]) at HP-Singapore,mimegw30
Date: 8/3/96 1:25 AM
Hello one and all,
I am having trouble with a labelled tape being recognized by one of the
three C1521B dds drives on my Series 947 running 4.0. The tape's label
was created by TapesPlus from Unison. I have three C1521B's hanging off
the system and the other two are able to load and read the label.
My question is (1)can I run SCSIDDS to reset that device using one of the
sections, and (2)is there somewhere, buried in a manual, descriptions of
the sections that are available? The SCSIDDS utility on my 5.0 dev system
tells me I need to have a self-maintainer/channel license to run it.
TIA,
Mike Kapsak
BFGoodrich Aerospace
|
|
|
