So you know, the terminator at the other (internal) end
of the MFIO's internal SCSI-SE bus is typically supplied
by enabling the first disk's built-in terminator. That
would be the device at the end of the ribbon cable.

               Bob J. -- Ideal Computer Services
               http://www.icsgroup.net


James B. Byrne wrote:
> On 4 Aug 2005 at 17:05, Craig Lalley wrote:
>
>
>>Is it the only drive on the controller?  Is it terminated?  What is
>>the SCSI address, remember that 7 is the SCSI adapter.
>
>
> Sigh... The LUN on the new HDD device is 2.  As far as I can
> determine it must be on the same controller as the DDS drive since
> it is physically connected to the same ribbon cable.  The paths for
> the existing HDD and DDS drives are all 56/52.x indicating to me
> that they are likely all on the same controller.  The only
> terminator that I am aware of is the one attached to the external
> 50 pin socket at the back of the 918LX chassis.
>
> Regards,
> Jim
>
> --
>      *** e-mail is not a secure channel ***
> mailto:byrnejb.<token>@harte-lyne.ca
> James B. Byrne                Harte & Lyne Limited
> vox: +1 905 561 1241          9 Brockley Drive
> fax: +1 905 561 0757          Hamilton, Ontario
> <token> = hal                 Canada L8E 3C3
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *