In order to switch to a different DTC, first of all run a job called
"JDTCLIST.PUB.SYS" (If you do not have the job, pl. let me know, I will send
you the job). The reason behind streaming this job is to find out what DTCs
are currently assigned on the system and also to get the profile of the
ports on your current DTC. Then, in NMMGR add new DTC. Then configure
cards/ports on the new DTC that would be identical to the profile of
existing ports. Then save data/cross validate and either press "Y" to accept
the changes immediately or wait till you restart the system next time in
order for changes to take effect. For additional discussion, do not hesitate
to contact me
-Satish Mehta
Summit Information Systems-St.Louis
[log in to unmask]



----- Original Message -----
From: "Chana, Harpreet TCS1C" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, February 18, 2001 12:55 AM
Subject: DTC Relocation.


> Hi all,
>
> I have to switch over from one DTC to another DTC with different model.
What
> should I have to do. I dont have much experience on DTC.
>
> Where I have to do the changes in System Side, DTC manager Side etc. I
want
> to keep all the old setting as they are existing.
>
> Appreciate your valuable comments.
>
> With Warm Regards
>
> Harpreet Singh Chana