I did not realize you were on an A or N class system.
My first thought was to get the trusty tech paper clip.
-Craig
From: Billy Brewer <[log in to unmask]>
To: [log in to unmask]
Sent: Thursday, April 28, 2016 3:53 PM
Subject: Re: Console not Respondin
No, I wanted to see if anyone had seen this before, but I will do this
-- thanks.
Billy
-------- Original Message --------
Subject: Re: [HP3000-L] Console not Respondin
From: David N Lukenbill <[log in to unmask]>
Date: Thu, April 28, 2016 6:25 pm
To: [log in to unmask]
Have you tried the reset button on the GSP? A quick press and release
might be in order.
DAVID LUKENBILL
Professional System Administrator, Americas - Standard Delivery -
Pittsburgh - iACTION Team 2 Member
CSC
6908 Mariemont Dr, Louisville, KY 40291
t: +1.502.762.1717 | m: +1.502.931.7261 | [log in to unmask] | www.csc.com
ADVANCE LEAVE NOTIFICATION: None
This is a PRIVATE message. If you are not the intended recipient, please
delete without copying and kindly advise us by e-mail of the mistake in
delivery.
NOTE: Regardless of content, this e-mail shall not operate to bind CSC
to
any order or other contract unless pursuant to explicit written
agreement
or government initiative expressly permitting the use of e-mail for such
purpose.
From: Billy Brewer <[log in to unmask]>
To: [log in to unmask]
Date: 04/28/2016 06:13 PM
Subject: [HP3000-L] Console not Respondin
Sent by: HP-3000 Systems Discussion <[log in to unmask]>
Hi console has become non-responsive after a very short power bleep.
I'm not there but feel comfortable what I have ask has been done, but
still
nothing on the physical console. So far:
Walked through console configuration - * in Remote Mode - 9600 Baud -,,,
all looks good then I had them unplug the cable power cycle the console
terminal -- reconfirm the configuration then reconnect and still
nothing.
I can connect to the GSP port and the session is connected,, but nothing
is
displayed,, <ctrl> A nor <ctrl> B works,, type away but no response.
I can them connect via VT-MGR and take the console :console !hpldevin
and I
receive all the console messages.
So, the messages are being sent (since I see them on the VT connection),
but neither the physical console nor the GSP gets any console messages
and
both non-responsive.
I hope I'm missing something very simple here -- so, what's the issue --
thanks.
-Billy
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
