Thanks for the replies.
I can't find these settings in rlogin and telnet so I don't think they are there.
As for other responses,
for rlogin: I get connected the 1st time, can login and configure. The problem is if I
logout and disconnect and try logging in again, Reflection launchs and then terminates with the
Windows send error to Microsoft window.
for telnet: I get to the box, get response but entering the password fails to login.
I am connecting to a LavaLink ether-serial box that allows serial access to our PBX over the network.
Oh, I don't have a copy of v14 and not really sure I want to make the leap. V9 works well for 3000 connection and I'm use to it.
bob
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Keven Miller
Sent: Friday, July 09, 2010 4:22 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Assistance with Reflection emulation
Not sure about the "crash".
But for any non-MPE system,
I would
1. uncheck the Enq/Ack box,
2. uncheck the Use Host prompt.
3. uncheck the Typeahead option.
(I think the typeahead only works when a host prompt is used; not
completely sure)
Keven Miller
----- Original Message -----
From: Bob McGregor
To: [log in to unmask]
Sent: Friday, July 09, 2010 02:58 PM
Subject: [HP3000-L] Assistance with Reflection emulation
So I setup Reflections rlogin and set the correct value for the username.
The first
time I can succefully login. If it close the connection and re-connect,
Reflection crashes
immediately.
So, I tried telnet. I can get the prompts from our PBX including the
PASS?
prompt but when I enter the password, I do not get logged in. I have done
a wireshark
capture and it does not appear to be an echo issue that I can see.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
