Shorthand summary of commands:
:cstm
map
sel device #
info
infolog
exit
ok

Here is a running of those commands on a 6.5 system
under cstm.
:cstm
Running Command File (/usr/sbin/stm/ui/config/.stmrc).


This operation may take approximately one minute.

-- Information --
Support Tools Manager




Version A.11.00


Product Number B4708AA


(C) Copyright Hewlett Packard Co. 1995-2000
All Rights Reserved

Use of this program is subject to the licensing restrictions described
in "Help-->On Version".  HP shall not be liable for any damages resulting
from misuse or unauthorized use of this program.

cstm>map
                                      hp917

  Dev                                                 Last        Last Op
  Num  Path                 Product                   Active Tool Status
  ===  ==================== ========================= ===========
=============
    1  52                   NIO SCSI Interface (14)
    2  52.0.0               SCSI Tape (HPHP35470A)    Information Successful
    3  52.1.0               Unknown ()
    4  52.2.0               SCSI Disk (HPC2490AM)     Expert Tool Successful
    5  52.5.0               Unknown ()
    6  52.8.0               Unknown ()
    7  52.9.0               Unknown ()
    8  56                   NIO LAN/Console Interface Expert Tool Successful
    9  62                   CPU (282)                 Information Successful
   10  63                   MEMORY (14)               Information Successful
cstm>sel device 10
cstm>info
cstm>infolog
-- Converting a (4828) byte raw log file to text. --
Preparing the Information Tool Log for MEMORY on path 63 File ...

.... hp917  :  192.6.1.37 ....

-- Information Tool Log for MEMORY on path 63 --

Log creation time: Tue Apr 24 09:33:47 2001

Hardware path: 63


Basic Memory Description

    Module Type: MEMORY
    Total Physical Memory     : 256 MB
    Total Configured Memory   : 256 MB
    Page Size: 4096 Bytes

    Memory interleaving is not supported on this machine.

Memory Board Inventory

                  Total Phys  Configured  Disabled
    Board         Size (MB)   Total (MB)  Total (MB)
    ------------  ----------  ----------  ----------
(24/2977) Continue?
            0A/B          64          64           0
            1A/B          32          32           0
            2A/B          32          32           0
            3A/B          64          64           0
            4A/B          64          64           0
                  ----------  ----------  ----------
   System Total:         256         256           0

Memory Controller Inventory

    Hard        Hardware  Hardware  Software  Software
    Physical    Model     Revision  Model     Revision  Software  IODC
    Address     Number    Number    Number    Number    Option    Revision
    ----------  --------  --------  --------  --------  --------  --------
    0xfffbf000      0x14         0       0x9         0         0         2

Bank Inventory

                                                                      Inter
    Log.  Phys                Size                                    leave
    Bank  Bank  Board         (MB)  Disabled?  SPA Range (Hex)        Group
    ----  ----  ------------  ----  ---------  ---------------------  -----
             0          0A/B    64  enabled    0x08000000 - 0bffffff    N/A
(47/2977) Continue?
             0          1A/B    16  enabled    0x0f000000 - 0fffffff    N/A
             1          1A/B    16  enabled    0x0c000000 - 0cffffff    N/A
             0          2A/B    16  enabled    0x0e000000 - 0effffff    N/A
             1          2A/B    16  enabled    0x0d000000 - 0dffffff    N/A
             0          3A/B    64  enabled    0x00000000 - 03ffffff    N/A
             0          4A/B    64  enabled    0x04000000 - 07ffffff    N/A

    Memory interleaving is not supported on this machine.

SPA - Page Map

    SPA Range (Hex)        Corresponding Pages
    ---------------------  --------------------------
    0x00000000 - 03ffffff            0 -        16383
    0x04000000 - 07ffffff        16384 -        32767
    0x08000000 - 0bffffff        32768 -        49151
    0x0c000000 - 0cffffff        49152 -        53247
    0x0d000000 - 0dffffff        53248 -        57343
    0x0e000000 - 0effffff        57344 -        61439
    0x0f000000 - 0fffffff        61440 -        65535

Memory Error Log Summary

(70/2977) Continue?
    The memory error log is empty.

Page Deallocation Table (PDT)

    This machine is not designed to have a Page Deallocation Table.

Memory Controller Rev Port

    Memory controller rev port not available.
-- Information Tool Log for MEMORY on path 63 --
View   - To View the file.
SaveAs - To Save the file.
Print  - To Print the file.
Enter Done, Help, Print, SaveAs, or View: [Done]
cstm>exit
-- Exit the Support Tool Manager --
Are you sure you want to exit the Support Tool Manager?
Enter Cancel, Help, or OK: [OK] ok
:
----- Original Message -----
From: "Jeff Kubler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, April 23, 2001 4:01 PM
Subject: Question regarding stm


> To all;
> Prior to 6.5 you could use Sysdiag with the memmap command to see the
> memory configuration.  What is the command under stm to get this
> information?  Is there another command that provides this info?
>
> Thanks,
> Jeff Kubler
> Jeff Kubler
> Kubler Consulting, Inc.
> 541-745-7457
> Fax: 810-885-1840
> email: [log in to unmask] or [log in to unmask]
> www.kublerconsulting.com
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *