If something like this were introduced, I'd like to see a method of
overriding the AutoRestart/iX configuration. Presently, if our system is
booted, unless interrupted, it will perform a memory dump to disk. If I
were invoking a shutdown command, I'd like the ability to tell the system to
just boot, and not dump, for that instance only.
Maybe SHUTDOWN RESTART NODUMP?
That would just do the START -R NORECOVERY instead of DUMP then START -R
NORECOVERY
-------------------------------------------------------------
Gary L. Paveza, Jr.
Production Support Analyst - Lead
(302) 761-3173 - voice
(877) 720-2970 - pager
-----Original Message-----
From: S.Shashikala [SMTP:[log in to unmask]]
Sent: Tuesday, September 11, 2001 7:23 AM
To: [log in to unmask]
Subject: [HP3000-L] New CI command:SHUTDOWN
Hi All,
We in CSY Lab are investigating the feasibility of providing a
SHUTDOWN command on the CI prompt in MPE/iX. As part of this
investigation we would like to know customer's expectations and
requirements regarding this command.
We have attached a brief description of what we think is essential
for this command. Please spend some time to review this command
and send us your comments/suggestions either directly to us through
email or to the 3000-L mailing list.
Thanks
shashi ([log in to unmask])
-------------------------------------------------------------------------
OBJECTIVE:
=========
Presently MPE/iX supports the =SHUTDOWN with console interrupt
([CTRL][A]).
The =SHUTDOWN command performs an implicit =LOGOFF of all sessions,
including the session logged at the system console. The CPU halts,
and console interrupt ([CTRL][A]) is ineffective .
The objective of this enhancement is to provide shutdown mechanism
with a
reboot option similar to HP-UX.
The enhancement provides a :SHUTDOWN command on the CI prompt, with
a RESTART option which shuts down the system completely and reboots
automatically.
EXISTING FUNCTIONALITY:
======================
=SHUTDOWN
Initiates a shutdown of MPE/iX.
syntax
=SHUTDOWN [system ]
[terminal]
[dtc ]
[tape ]
[disk ]
[network ]
[other ]
The machine will be completely shutdown. It needs operator
intervention. CTRL-B ,TC or RS is needed to boot the system.
New CI Command :
================
:SHUTDOWN
Initiates a shutdown of MPE/iX.
syntax
:SHUTDOWN [system ];RESTART
[terminal]
[dtc ]
[tape ]
[disk ]
[network ]
[other ]
:SHUTDOWN
will shutdown the system completely.
:SHUTDOWN;RESTART
will shutdown the system completely and reboot the system
automatically to ISL> prompt.
This command can be issued only by users with system manager
(SM)
or system supervisor (OP) capability.
This RESTART option is not applicable to other types of
devices such as terminal, dtc, tape etc.
With AUTOBOOT:
With this :SHUTDOWN ;RESTART option, we are also proposing to
give AUTOBOOT functionality as part of the solution. Currently
AUTOBOOT is available only with AUTORESTART product.
With AUTOBOOT configuration, the system can be restarted
automatically.
In simple terms, AUTOBOOT configuration file specifies the command
to be RUN in ISL> prompt when the control transfers to ISL prompt.
Hence,
when :SHUTDOWN ;RESTART results in ISL, it automatically executes
the
command in AUTOBOOT file (typical command is :START -R NORECOVERY
...).
Before executing the AUTOBOOT sequence, there exists a 10 seconds
window
to abort the AUTOBOOT sequence, in case operator/manager wants to
perform
some other operation.
Sample steps for creating the Autoboot file and configuration
=============================================================
1. :SHUTDOWN;RESTART with AUTOBOOT feature
------------------------------------------
The AUTOBOOT feature provides a FORMAT utility that enables user to
create
a specially formatted file that contains the special sequence of
startup
commands. The system automatically executes these commands in
sequence
during system startup if this feature is activated.
Building a AUTOBOOT file
-------------------------
* Create a file called AUTOIN which contains the
"START -R NORECOVERY" command .
* Run FORMAT.PUB.SYS. Output will be in a file called AUTOOUT
in the same group.
* Copy AUTOOUT,AUTOBOOT.MPEXL.SYS
* Set the autoboot file with the SYSGEN utility.
:SYSGEN
>sy
>aa file=autoboot.mpexl.sys;type=disc
>hold
>exit
>keep
>tape verbose
* Perform a configuration UPDATE to your system with the CSLT tape
created under SYSGEN
* After UPDATE is done, use the ISL AUTOBOOT command to
enable the autoboot feature.
At the ISL prompt enter:
ISL> AUTOBOOT ON
* Use the START command with the -R option, to start the system.
At the ISL prompt enter:
ISL> START -R start_options
If the -R option is not used with the START command the autoboot
feature
wil not be enabled.
Once the above steps are complete & the autoboot feature is
enabled, the
commnd :SHUTDOWN;RESTART will completely shutdown the system and
the
startup needs no operator intervention.
(See the sample output 1)
SAMPLE OUTPUT
==============
1.With the AUTOBOOT feature enabled:
------------------------------------
:SHUTDOWN;restart
Shutdown of operating system begins. (Shut 1)
Shutdown of user processes begins. (Shut 2)
Shutdown of jobs & sessions begins. (Shut 3)
Spoolers notified of a shutdown. (Shut16)
Shutdown of system processes begins. (Shut 4)
Shutdown of system managers begins. (Shut 5)
Shutdown of operating system complete. (Shut 6)
---------------------------------------------------------------
PDC - Processor Dependent Code - Version 1.2
(c) Copyright 1990-1993, Hewlett-Packard Company, All rights
reserved
---------------------------------------------------------------
64 MB of memory configured and tested.
Primary boot path: 56/52.4 (dec)
Alternate boot path: 56/52.0 (dec)
Processor is starting autoboot process.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
..
..
Booting...
..
..
2.With the DUMP-TO-DISK and AUTOBOOT feature enabled:
--------------------------------------------------
:SHUTDOWN;restart
Shutdown of operating system begins. (Shut 1)
Shutdown of user processes begins. (Shut 2)
Shutdown of jobs & sessions begins. (Shut 3)
Spoolers notified of a shutdown. (Shut16)
Shutdown of system processes begins. (Shut 4)
Shutdown of system managers begins. (Shut 5)
Shutdown of operating system complete. (Shut 6)
------------------------------------------------------------
PDC - Processor Dependent Code - Version 1.2
(c) Copyright 1990-1993, Hewlett-Packard Company, All rights
reserved
---------------------------------------------------------------
64 MB of memory configured and tested.
Primary boot path: 56/52.4 (dec)
Alternate boot path: 56/52.0 (dec)
Processor is starting autoboot process.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting..
..
..
ISL booting DUMP
MPE/iX launch facility
................
Dump of memory save area complete.
Main memory dump complete.
Dump completed - autoboot in progress.
Checking for Autorestart/iX product to be active.
Autorestart/iX product active, Hard booting the system.
----------------------------------------------------------------------------
--
PDC - Processor Dependent Code - Version 1.2
(c) Copyright 1990-1993, Hewlett-Packard Company, All rights
reserved
----------------------------------------------------------------------------
--
64 MB of memory configured and tested.
Primary boot path: 56/52.4 (dec)
Alternate boot path: 56/52.0 (dec)
Processor is starting autoboot process.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting...
..
..
..
ISL booting
START -R NORECOVERY
MPE/iX launch facility
----------------------------end of sample output ----------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|